Version 2.0.0-next.11

Major changes

feat(cli): remove backup/restore/force options from set-version (#1687) (opens in a new tab) (@latticexyz/cli)

Removes .mudbackup file handling and --backup, --restore, and --force options from mud set-version command.

To revert to a previous MUD version, use git diff to find the version that you changed from and want to revert to and run pnpm mud set-version <prior-version> again.

Minor changes

feat(world-modules): add SystemSwitch util (#1665) (opens in a new tab) (@latticexyz/world-modules)

Since #1564 (opens in a new tab) the World can no longer call itself via an external call. This made the developer experience of calling other systems via root systems worse, since calls from root systems are executed from the context of the World. The recommended approach is to use delegatecall to the system if in the context of a root system, and an external call via the World if in the context of a non-root system. To bring back the developer experience of calling systems from other sysyems without caring about the context in which the call is executed, we added the SystemSwitch util.

- // Instead of calling the system via an external call to world...
- uint256 value = IBaseWorld(_world()).callMySystem();
 
+ // ...you can now use the `SystemSwitch` util.
+ // This works independent of whether used in a root system or non-root system.
+ uint256 value = abi.decode(SystemSwitch.call(abi.encodeCall(IBaseWorld.callMySystem, ()), (uint256));

Note that if you already know your system is always executed as non-root system, you can continue to use the approach of calling other systems via the IBaseWorld(world).

refactor(common): move createContract's internal write logic to writeContract (#1693) (opens in a new tab) (@latticexyz/common)

• Moves contract write logic out of createContract into its own writeContract method so that it can be used outside of the contract instance, and for consistency with viem.
• Deprecates createContract in favor of getContract for consistency with viem.
• Reworks createNonceManager's BroadcastChannel setup and moves out the notion of a "nonce manager ID" to getNonceManagerId so we can create an internal cache with getNonceManager for use in writeContract.

If you were using the createNonceManager before, you'll just need to rename publicClient argument to client:

  const publicClient = createPublicClient({ ... });
- const nonceManager = createNonceManager({ publicClient, ... });
+ const nonceManager = createNonceManager({ client: publicClient, ... });

feat(gas-reporter): allow gas-reporter to parse stdin (#1688) (opens in a new tab) (@latticexyz/gas-report)

Allow the gas-report CLI to parse logs via stdin, so it can be used with custom test commands (e.g. mud test).

Usage:

# replace `forge test -vvv` with the custom test command
GAS_REPORTER_ENABLED=true forge test -vvv | pnpm gas-report --stdin

Patch changes

feat(store-sync): export postgres column type helpers (#1699) (opens in a new tab) (@latticexyz/store-sync)

Export postgres column type helpers from @latticexyz/store-sync.

fix(common): workaround for zero base fee (#1689) (opens in a new tab) (@latticexyz/common)

Adds viem workaround for zero base fee used by MUD's anvil config

fix(world): register store namespace during initialization (#1712) (opens in a new tab) (@latticexyz/world)

Register the store namespace in the CoreModule. Since namespaces are a World concept, registering the Store's internal tables does not automatically register the Store's namespace, so we do this manually during initialization in the CoreModule.

build: bump viem and abitype (#1684) (opens in a new tab) (@latticexyz/block-logs-stream, @latticexyz/cli, @latticexyz/common, @latticexyz/dev-tools, @latticexyz/faucet, @latticexyz/protocol-parser, @latticexyz/schema-type, @latticexyz/store-indexer, @latticexyz/store-sync, @latticexyz/store, create-mud)

Bump viem to 1.14.0 and abitype to 0.9.8

feat(gas-report): add more logs to stdin piping (#1694) (opens in a new tab) (@latticexyz/gas-report)

Pass through stdin logs in gas-report. Since the script piping in logs to gas-report can be long-running, it is useful to see its logs to know if it's stalling.

fix(protocol-parser): allow arbitrary key order when encoding values (#1674) (opens in a new tab) (@latticexyz/protocol-parser)

Allow arbitrary key order when encoding values

Version 2.0.0-next.10

Major changes

refactor(world): expose library for WorldContextConsumer (#1624) (opens in a new tab) (@latticexyz/world-modules, @latticexyz/world)

We now expose a WorldContextConsumerLib library with the same functionality as the WorldContextConsumer contract, but the ability to be used inside of internal libraries. We also renamed the WorldContextProvider library to WorldContextProviderLib for consistency.

Minor changes

docs: changeset for indexer/store sync table IDs param (#1662) (opens in a new tab) (@latticexyz/store-indexer, @latticexyz/store-sync)

Added a tableIds parameter to store sync methods and indexer to allow filtering data streams by table IDs. Store sync methods automatically include all internal table IDs from Store and World.

import { syncToRecs } from "@latticexyz/store-sync/recs";
import { resourceIdToHex } from "@latticexyz/common";
 
syncToRecs({
  ...
  tableIds: [resourceIdToHex(...)],
});

import { createIndexerClient } from "@latticexyz/store-sync/trpc-indexer";
import { resourceIdToHex } from "@latticexyz/common";
 
const client = createIndexerClient({ ... });
client.findAll({
  ...
  tableIds: [resourceIdToHex(...)],
});

feat(world): return world address from WorldFactory (#1675) (opens in a new tab) (@latticexyz/world)

Return address of the newly created World from WorldFactory.deployWorld.

Patch changes

fix(cli): fix table IDs for module install (#1663) (opens in a new tab) (@latticexyz/cli)

Fix table IDs for module install step of deploy

fix(cli): register namespace with namespaceId (#1619) (opens in a new tab) (@latticexyz/cli)

We fixed a bug in the deploy script that would cause the deployment to fail if a non-root namespace was used in the config.

Version 2.0.0-next.9

Major changes

feat(world): move interfaces/factories to root (#1606) (opens in a new tab) (@latticexyz/world)

Moves World interfaces and factories files for consistency with our other packages.

If you import any World interfaces or factories directly, you'll need to update the import path:

- import { IBaseWorld } from "@latticexyz/world/src/interfaces/IBaseWorld.sol";
+ import { IBaseWorld } from "@latticexyz/world/src/IBaseWorld.sol";

- import { IBaseWorld } from "@latticexyz/world/src/factories/WorldFactory.sol";
+ import { IBaseWorld } from "@latticexyz/world/src/WorldFactory.sol";

feat(world): prevent the World from calling itself (#1563) (opens in a new tab) (@latticexyz/world)

All World methods now revert if the World calls itself. The World should never need to externally call itself, since all internal table operations happen via library calls, and all root system operations happen via delegate call.

It should not be possible to make the World call itself as an external actor. If it were possible to make the World call itself, it would be possible to write to internal tables that only the World should have access to. As this is a very important invariance, we made it explicit in a requirement check in every World method, rather than just relying on making it impossible to trigger the World to call itself.

This is a breaking change for modules that previously used external calls to the World in the installRoot method. In the installRoot method, the World can only be called via delegatecall, and table operations should be performed via the internal table methods (e.g. _set instead of set).

Example for how to replace external calls to world in root systems / root modules (installRoot) with delegatecall:

+ import { revertWithBytes } from "@latticexyz/world/src/revertWithBytes.sol";
 
- world.grantAccess(tableId, address(hook));
+ (bool success, bytes memory returnData) = address(world).delegatecall(
+   abi.encodeCall(world.grantAccess, (tableId, address(hook)))
+ );
 
+ if (!success) revertWithBytes(returnData);

feat: rename schema to valueSchema (#1482) (opens in a new tab) (@latticexyz/cli, @latticexyz/protocol-parser, @latticexyz/store-sync, @latticexyz/store, create-mud)

Renamed all occurrences of schema where it is used as "value schema" to valueSchema to clearly distinguish it from "key schema". The only breaking change for users is the change from schema to valueSchema in mud.config.ts.

// mud.config.ts
export default mudConfig({
  tables: {
    CounterTable: {
      keySchema: {},
-     schema: {
+     valueSchema: {
        value: "uint32",
      },
    },
  }
}

refactor(world): move codegen files (#1592) (opens in a new tab) (@latticexyz/cli, @latticexyz/world-modules, @latticexyz/world)

Tables and interfaces in the world package are now generated to the codegen folder. This is only a breaking change if you imported tables or codegenerated interfaces from @latticexyz/world directly. If you're using the MUD CLI, the changed import paths are already integrated and no further changes are necessary.

- import { IBaseWorld } from "@latticexyz/world/src/interfaces/IBaseWorld.sol";
+ import { IBaseWorld } from "@latticexyz/world/src/codegen/interfaces/IBaseWorld.sol";
 

refactor(store): always render field methods with suffix and conditionally without (#1550) (opens in a new tab) (@latticexyz/common)

• Add renderWithFieldSuffix helper method to always render a field function with a suffix, and optionally render the same function without a suffix.
• Remove methodNameSuffix from RenderField interface, because the suffix is now computed as part of renderWithFieldSuffix.

feat(store,): add splice events (#1354) (opens in a new tab) (@latticexyz/store, @latticexyz/world)

We've updated Store events to be "schemaless", meaning there is enough information in each event to only need to operate on the bytes of each record to make an update to that record without having to first decode the record by its schema. This enables new kinds of indexers and sync strategies.

If you've written your own sync logic or are interacting with Store calls directly, this is a breaking change. We have a few more breaking protocol changes upcoming, so you may hold off on upgrading until those land.

If you are using MUD's built-in tooling (table codegen, indexer, store sync, etc.), you don't have to make any changes except upgrading to the latest versions and deploying a fresh World.

• The data field in each StoreSetRecord and StoreEphemeralRecord has been replaced with three new fields: staticData, encodedLengths, and dynamicData. This better reflects the on-chain state and makes it easier to perform modifications to the raw bytes. We recommend storing each of these fields individually in your off-chain storage of choice (indexer, client, etc.).

  - event StoreSetRecord(bytes32 tableId, bytes32[] keyTuple, bytes data);
  + event StoreSetRecord(bytes32 tableId, bytes32[] keyTuple, bytes staticData, bytes32 encodedLengths, bytes dynamicData);
   
  - event StoreEphemeralRecord(bytes32 tableId, bytes32[] keyTuple, bytes data);
  + event StoreEphemeralRecord(bytes32 tableId, bytes32[] keyTuple, bytes staticData, bytes32 encodedLengths, bytes dynamicData);

• The StoreSetField event is now replaced by two new events: StoreSpliceStaticData and StoreSpliceDynamicData. Splicing allows us to perform efficient operations like push and pop, in addition to replacing a field value. We use two events because updating a dynamic-length field also requires updating the record's encodedLengths (aka PackedCounter).

  - event StoreSetField(bytes32 tableId, bytes32[] keyTuple, uint8 fieldIndex, bytes data);
  + event StoreSpliceStaticData(bytes32 tableId, bytes32[] keyTuple, uint48 start, uint40 deleteCount, bytes data);
  + event StoreSpliceDynamicData(bytes32 tableId, bytes32[] keyTuple, uint48 start, uint40 deleteCount, bytes data, bytes32 encodedLengths);

Similarly, Store setter methods (e.g. setRecord) have been updated to reflect the data to staticData, encodedLengths, and dynamicData changes. We'll be following up shortly with Store getter method changes for more gas efficient storage reads.

refactor(store): change argument order on Store_SpliceDynamicData and hooks for consistency (#1589) (opens in a new tab) (@latticexyz/store)

The argument order on Store_SpliceDynamicData, onBeforeSpliceDynamicData and onAfterSpliceDynamicData has been changed to match the argument order on Store_SetRecord, where the PackedCounter encodedLength field comes before the bytes dynamicData field.

IStore {
  event Store_SpliceDynamicData(
    ResourceId indexed tableId,
    bytes32[] keyTuple,
    uint48 start,
    uint40 deleteCount,
+   PackedCounter encodedLengths,
    bytes data,
-   PackedCounter encodedLengths
  );
}
 
IStoreHook {
  function onBeforeSpliceDynamicData(
    ResourceId tableId,
    bytes32[] memory keyTuple,
    uint8 dynamicFieldIndex,
    uint40 startWithinField,
    uint40 deleteCount,
+   PackedCounter encodedLengths,
    bytes memory data,
-   PackedCounter encodedLengths
  ) external;
 
  function onAfterSpliceDynamicData(
    ResourceId tableId,
    bytes32[] memory keyTuple,
    uint8 dynamicFieldIndex,
    uint40 startWithinField,
    uint40 deleteCount,
+   PackedCounter encodedLengths,
    bytes memory data,
-   PackedCounter encodedLengths
  ) external;
}

feat(store,): add splice events (#1354) (opens in a new tab) (@latticexyz/common, @latticexyz/protocol-parser)

readHex was moved from @latticexyz/protocol-parser to @latticexyz/common

feat(store,world): move hooks to bit flags (#1527) (opens in a new tab) (@latticexyz/store, @latticexyz/world)

Moved the registration of store hooks and systems hooks to bitmaps with bitwise operator instead of a struct.

- import { StoreHookLib } from "@latticexyz/src/StoreHook.sol";
+ import {
+   BEFORE_SET_RECORD,
+   BEFORE_SET_FIELD,
+   BEFORE_DELETE_RECORD
+ } from "@latticexyz/store/storeHookTypes.sol";
 
  StoreCore.registerStoreHook(
    tableId,
    subscriber,
-   StoreHookLib.encodeBitmap({
-     onBeforeSetRecord: true,
-     onAfterSetRecord: false,
-     onBeforeSetField: true,
-     onAfterSetField: false,
-     onBeforeDeleteRecord: true,
-     onAfterDeleteRecord: false
-   })
+   BEFORE_SET_RECORD | BEFORE_SET_FIELD | BEFORE_DELETE_RECORD
  );

- import { SystemHookLib } from "../src/SystemHook.sol";
+ import { BEFORE_CALL_SYSTEM, AFTER_CALL_SYSTEM } from "../src/systemHookTypes.sol";
 
  world.registerSystemHook(
    systemId,
    subscriber,
-   SystemHookLib.encodeBitmap({ onBeforeCallSystem: true, onAfterCallSystem: true })
+   BEFORE_CALL_SYSTEM | AFTER_CALL_SYSTEM
  );
 

feat(store,world): add splice hooks, expose spliceStaticData, spliceDynamicData (#1531) (opens in a new tab) (@latticexyz/store, @latticexyz/world)

• The IStoreHook interface was changed to replace onBeforeSetField and onAfterSetField with onBeforeSpliceStaticData, onAfterSpliceStaticData, onBeforeSpliceDynamicData and onAfterSpliceDynamicData.

  This new interface matches the new StoreSpliceStaticData and StoreSpliceDynamicData events, and avoids having to read the entire field from storage when only a subset of the field was updated (e.g. when pushing elements to a field).

  interface IStoreHook {
  - function onBeforeSetField(
  -   bytes32 tableId,
  -   bytes32[] memory keyTuple,
  -   uint8 fieldIndex,
  -   bytes memory data,
  -   FieldLayout fieldLayout
  - ) external;
   
  - function onAfterSetField(
  -   bytes32 tableId,
  -   bytes32[] memory keyTuple,
  -   uint8 fieldIndex,
  -   bytes memory data,
  -   FieldLayout fieldLayout
  - ) external;
   
  + function onBeforeSpliceStaticData(
  +   bytes32 tableId,
  +   bytes32[] memory keyTuple,
  +   uint48 start,
  +   uint40 deleteCount,
  +   bytes memory data
  + ) external;
   
  + function onAfterSpliceStaticData(
  +   bytes32 tableId,
  +   bytes32[] memory keyTuple,
  +   uint48 start,
  +   uint40 deleteCount,
  +   bytes memory data
  + ) external;
   
  + function onBeforeSpliceDynamicData(
  +   bytes32 tableId,
  +   bytes32[] memory keyTuple,
  +   uint8 dynamicFieldIndex,
  +   uint40 startWithinField,
  +   uint40 deleteCount,
  +   bytes memory data,
  +   PackedCounter encodedLengths
  + ) external;
   
  + function onAfterSpliceDynamicData(
  +   bytes32 tableId,
  +   bytes32[] memory keyTuple,
  +   uint8 dynamicFieldIndex,
  +   uint40 startWithinField,
  +   uint40 deleteCount,
  +   bytes memory data,
  +   PackedCounter encodedLengths
  + ) external;
  }

• All calldata parameters on the IStoreHook interface were changed to memory, since the functions are called with memory from the World.

• IStore exposes two new functions: spliceStaticData and spliceDynamicData.

  These functions provide lower level access to the operations happening under the hood in setField, pushToField, popFromField and updateInField and simplify handling the new splice hooks.

  StoreCore's internal logic was simplified to use the spliceStaticData and spliceDynamicData functions instead of duplicating similar logic in different functions.

  interface IStore {
    // Splice data in the static part of the record
    function spliceStaticData(
      bytes32 tableId,
      bytes32[] calldata keyTuple,
      uint48 start,
      uint40 deleteCount,
      bytes calldata data
    ) external;
   
    // Splice data in the dynamic part of the record
    function spliceDynamicData(
      bytes32 tableId,
      bytes32[] calldata keyTuple,
      uint8 dynamicFieldIndex,
      uint40 startWithinField,
      uint40 deleteCount,
      bytes calldata data
    ) external;
  }

feat: replace Schema with FieldLayout for contract internals (#1336) (opens in a new tab) (@latticexyz/cli, @latticexyz/protocol-parser, @latticexyz/store, @latticexyz/world)

• Add FieldLayout, which is a bytes32 user-type similar to Schema.

  Both FieldLayout and Schema have the same kind of data in the first 4 bytes.

  • 2 bytes for total length of all static fields
  • 1 byte for number of static size fields
  • 1 byte for number of dynamic size fields

  But whereas Schema has SchemaType enum in each of the other 28 bytes, FieldLayout has static byte lengths in each of the other 28 bytes.

• Replace Schema valueSchema with FieldLayout fieldLayout in Store and World contracts.

  FieldLayout is more gas-efficient because it already has lengths, and Schema has types which need to be converted to lengths.

• Add getFieldLayout to IStore interface.

  There is no FieldLayout for keys, only for values, because key byte lengths aren't usually relevant on-chain. You can still use getKeySchema if you need key types.

• Add fieldLayoutToHex utility to protocol-parser package.

• Add constants.sol for constants shared between FieldLayout, Schema and PackedCounter.

refactor: separate data into staticData, encodedLengths, dynamicData in getRecord (#1532) (opens in a new tab) (@latticexyz/store, @latticexyz/world)

Store's getRecord has been updated to return staticData, encodedLengths, and dynamicData instead of a single data blob, to match the new behaviour of Store setter methods.

If you use codegenerated libraries, you will only need to update encode calls.

- bytes memory data = Position.encode(x, y);
+ (bytes memory staticData, PackedCounter encodedLengths, bytes memory dynamicData) = Position.encode(x, y);

feat(world): add FunctionSignatures offchain table (#1575) (opens in a new tab) (@latticexyz/cli, @latticexyz/world)

The registerRootFunctionSelector function's signature was changed to accept a string functionSignature parameter instead of a bytes4 functionSelector parameter. This change enables the World to store the function signatures of all registered functions in a FunctionSignatures offchain table, which will allow for the automatic generation of interfaces for a given World address in the future.

IBaseWorld {
  function registerRootFunctionSelector(
    ResourceId systemId,
-   bytes4 worldFunctionSelector,
+   string memory worldFunctionSignature,
    bytes4 systemFunctionSelector
  ) external returns (bytes4 worldFunctionSelector);
}

feat: move forge build + abi + abi-ts to out (#1483) (opens in a new tab) (@latticexyz/store, @latticexyz/world)

Store and World contract ABIs are now exported from the out directory. You'll need to update your imports like:

- import IBaseWorldAbi from "@latticexyz/world/abi/IBaseWorld.sol/IBaseWorldAbi.json";
+ import IBaseWorldAbi from "@latticexyz/world/out/IBaseWorld.sol/IBaseWorldAbi.json";

MudTest.sol was also moved to the World package. You can update your import like:

- import { MudTest } from "@latticexyz/store/src/MudTest.sol";
+ import { MudTest } from "@latticexyz/world/test/MudTest.t.sol";

feat(common,store): add support for user-defined types (#1566) (opens in a new tab) (@latticexyz/store)

These breaking changes only affect store utilities, you aren't affected if you use @latticexyz/cli codegen scripts.

• Add remappings argument to the tablegen codegen function, so that it can read user-provided files.
• In RenderTableOptions change the type of imports from RelativeImportDatum to ImportDatum, to allow passing absolute imports to the table renderer.
• Add solidityUserTypes argument to several functions that need to resolve user or abi types: resolveAbiOrUserType, importForAbiOrUserType, getUserTypeInfo.
• Add userTypes config option to MUD config, which takes user types mapped to file paths from which to import them.

refactor(store): always render field methods with suffix and conditionally without (#1550) (opens in a new tab) (@latticexyz/store)

• Always render field methods with a suffix in tablegen (they used to not be rendered if field methods without a suffix were rendered).
• Add withSuffixlessFieldMethods to RenderTableOptions, which indicates that field methods without a suffix should be rendered.

refactor(store,world): move around interfaces and base contracts (#1602) (opens in a new tab) (@latticexyz/store, @latticexyz/world)

• Moves Store events into its own IStoreEvents interface
• Moves Store interfaces to their own files
• Adds a StoreData abstract contract to initialize a Store and expose the Store version

If you're using MUD out of the box, you won't have to make any changes. You will only need to update if you're using any of the base Store interfaces.

feat(world): change registerFunctionSelector signature to accept system signature as a single string (#1574) (opens in a new tab) (@latticexyz/cli, @latticexyz/world)

The registerFunctionSelector function now accepts a single functionSignature string paramemer instead of separating function name and function arguments into separate parameters.

IBaseWorld {
  function registerFunctionSelector(
    ResourceId systemId,
-   string memory systemFunctionName,
-   string memory systemFunctionArguments
+   string memory systemFunctionSignature
  ) external returns (bytes4 worldFunctionSelector);
}

This is a breaking change if you were manually registering function selectors, e.g. in a PostDeploy.s.sol script or a module. To upgrade, simply replace the separate systemFunctionName and systemFunctionArguments parameters with a single systemFunctionSignature parameter.

  world.registerFunctionSelector(
    systemId,
-   systemFunctionName,
-   systemFunctionArguments,
+   string(abi.encodePacked(systemFunctionName, systemFunctionArguments))
  );

feat(store,world): replace ResourceSelector with ResourceId and WorldResourceId (#1544) (opens in a new tab) (@latticexyz/world)

All World methods acting on namespaces as resources have been updated to use ResourceId namespaceId as parameter instead of bytes14 namespace. The reason for this change is to make it clearer when a namespace is used as resource, as opposed to being part of another resource's ID.

+ import { ResourceId } from "@latticexyz/store/src/ResourceId.sol";
 
IBaseWorld {
- function registerNamespace(bytes14 namespace) external;
+ function registerNamespace(ResourceId namespaceId) external;
 
- function transferOwnership(bytes14 namespace, address newOwner) external;
+ function transferOwnership(ResourceId namespaceId, address newOwner) external;
 
- function transferBalanceToNamespace(bytes14 fromNamespace, bytes14 toNamespace, uint256 amount) external;
+ function transferBalanceToNamespace(ResourceId fromNamespaceId, ResourceId toNamespaceId, uint256 amount) external;
 
- function transferBalanceToAddress(bytes14 fromNamespace, address toAddress, uint256 amount) external;
+ function transferBalanceToAddress(ResourceId fromNamespaceId, address toAddress, uint256 amount) external;
}
 

feat: bump solidity to 0.8.21 (#1473) (opens in a new tab) (@latticexyz/cli, @latticexyz/common, @latticexyz/gas-report, @latticexyz/noise, @latticexyz/schema-type, @latticexyz/store, @latticexyz/world, create-mud)

Bump Solidity version to 0.8.21

feat(world): add batchCallFrom (#1594) (opens in a new tab) (@latticexyz/world)

• IBaseWorld now has a batchCallFrom method, which allows system calls via callFrom to be executed in batch.

import { SystemCallFromData } from "@latticexyz/world/modules/core/types.sol";
 
interface IBaseWorld {
  function batchCallFrom(SystemCallFromData[] calldata systemCalls) external returns (bytes[] memory returnDatas);
}

• The callBatch method of IBaseWorld has been renamed to batchCall to align better with the batchCallFrom method.

interface IBaseWorld {
- function callBatch(SystemCallData[] calldata systemCalls) external returns (bytes[] memory returnDatas);
+ function batchCall(SystemCallData[] calldata systemCalls) external returns (bytes[] memory returnDatas);
}

feat(store): codegen index and common files (#1318) (opens in a new tab) (@latticexyz/cli, @latticexyz/store, create-mud)

Renamed the default filename of generated user types from Types.sol to common.sol and the default filename of the generated table index file from Tables.sol to index.sol.

Both can be overridden via the MUD config:

export default mudConfig({
  /** Filename where common user types will be generated and imported from. */
  userTypesFilename: "common.sol",
  /** Filename where codegen index will be generated. */
  codegenIndexFilename: "index.sol",
});

Note: userTypesFilename was renamed from userTypesPath and .sol is not appended automatically anymore but needs to be part of the provided filename.

To update your existing project, update all imports from Tables.sol to index.sol and all imports from Types.sol to common.sol, or override the defaults in your MUD config to the previous values.

- import { Counter } from "../src/codegen/Tables.sol";
+ import { Counter } from "../src/codegen/index.sol";
- import { ExampleEnum } from "../src/codegen/Types.sol";
+ import { ExampleEnum } from "../src/codegen/common.sol";

feat(store,): add splice events (#1354) (opens in a new tab) (@latticexyz/dev-tools, @latticexyz/store-sync, create-mud)

We've updated Store events to be "schemaless", meaning there is enough information in each event to only need to operate on the bytes of each record to make an update to that record without having to first decode the record by its schema. This enables new kinds of indexers and sync strategies.

As such, we've replaced blockStorageOperations$ with storedBlockLogs$, a stream of simplified Store event logs after they've been synced to the configured storage adapter. These logs may not reflect exactly the events that are on chain when e.g. hydrating from an indexer, but they will still allow the client to "catch up" to the on-chain state of your tables.

feat(store,world): replace ephemeral tables with offchain tables (#1558) (opens in a new tab) (@latticexyz/block-logs-stream, @latticexyz/cli, @latticexyz/common, @latticexyz/dev-tools, @latticexyz/store-sync, @latticexyz/store, create-mud)

What used to be known as ephemeral table is now called offchain table. The previous ephemeral tables only supported an emitEphemeral method, which emitted a StoreSetEphemeralRecord event.

Now offchain tables support all regular table methods, except partial operations on dynamic fields (push, pop, update). Unlike regular tables they don't store data on-chain but emit the same events as regular tables (StoreSetRecord, StoreSpliceStaticData, StoreDeleteRecord), so their data can be indexed by offchain indexers/clients.

- EphemeralTable.emitEphemeral(value);
+ OffchainTable.set(value);

refactor(store,world): move store tables to store namespace, world tables to world namespace (#1601) (opens in a new tab) (@latticexyz/store-sync, @latticexyz/store, @latticexyz/world-modules, @latticexyz/world)

Moved store tables to the "store" namespace (previously "mudstore") and world tables to the "world" namespace (previously root namespace).

feat(store): rename events for readability and consistency with errors (#1577) (opens in a new tab) (@latticexyz/block-logs-stream, @latticexyz/dev-tools, @latticexyz/store-sync, @latticexyz/store)

Store events have been renamed for consistency and readability. If you're parsing Store events manually, you need to update your ABI. If you're using the MUD sync stack, the new events are already integrated and no further changes are necessary.

- event StoreSetRecord(
+ event Store_SetRecord(
    ResourceId indexed tableId,
    bytes32[] keyTuple,
    bytes staticData,
    bytes32 encodedLengths,
    bytes dynamicData
  );
- event StoreSpliceStaticData(
+ event Store_SpliceStaticData(
    ResourceId indexed tableId,
    bytes32[] keyTuple,
    uint48 start,
    uint40 deleteCount,
    bytes data
  );
- event StoreSpliceDynamicData(
+ event Store_SpliceDynamicData(
    ResourceId indexed tableId,
    bytes32[] keyTuple,
    uint48 start,
    uint40 deleteCount,
    bytes data,
    bytes32 encodedLengths
  );
- event StoreDeleteRecord(
+ event Store_DeleteRecord(
    ResourceId indexed tableId,
    bytes32[] keyTuple
  );

feat(store,world): replace ResourceSelector with ResourceId and WorldResourceId (#1544) (opens in a new tab) (@latticexyz/cli, @latticexyz/common, @latticexyz/config, @latticexyz/store)

• ResourceSelector is replaced with ResourceId, ResourceIdLib, ResourceIdInstance, WorldResourceIdLib and WorldResourceIdInstance.

  Previously a "resource selector" was a bytes32 value with the first 16 bytes reserved for the resource's namespace, and the last 16 bytes reserved for the resource's name. Now a "resource ID" is a bytes32 value with the first 2 bytes reserved for the resource type, the next 14 bytes reserved for the resource's namespace, and the last 16 bytes reserved for the resource's name.

  Previously ResouceSelector was a library and the resource selector type was a plain bytes32. Now ResourceId is a user type, and the functionality is implemented in the ResourceIdInstance (for type) and WorldResourceIdInstance (for namespace and name) libraries. We split the logic into two libraries, because Store now also uses ResourceId and needs to be aware of resource types, but not of namespaces/names.

  - import { ResourceSelector } from "@latticexyz/world/src/ResourceSelector.sol";
  + import { ResourceId, ResourceIdInstance } from "@latticexyz/store/src/ResourceId.sol";
  + import { WorldResourceIdLib, WorldResourceIdInstance } from "@latticexyz/world/src/WorldResourceId.sol";
  + import { RESOURCE_SYSTEM } from "@latticexyz/world/src/worldResourceTypes.sol";
   
  - bytes32 systemId = ResourceSelector.from("namespace", "name");
  + ResourceId systemId = WorldResourceIdLib.encode(RESOURCE_SYSTEM, "namespace", "name");
   
  - using ResourceSelector for bytes32;
  + using WorldResourceIdInstance for ResourceId;
  + using ResourceIdInstance for ResourceId;
   
    systemId.getName();
    systemId.getNamespace();
  + systemId.getType();
   

• All Store and World methods now use the ResourceId type for tableId, systemId, moduleId and namespaceId. All mentions of resourceSelector were renamed to resourceId or the more specific type (e.g. tableId, systemId)

  import { ResourceId } from "@latticexyz/store/src/ResourceId.sol";
   
  IStore {
    function setRecord(
  -   bytes32 tableId,
  +   ResourceId tableId,
      bytes32[] calldata keyTuple,
      bytes calldata staticData,
      PackedCounter encodedLengths,
      bytes calldata dynamicData,
      FieldLayout fieldLayout
    ) external;
   
    // Same for all other methods
  }

  import { ResourceId } from "@latticexyz/store/src/ResourceId.sol";
   
  IBaseWorld {
    function callFrom(
      address delegator,
  -   bytes32 resourceSelector,
  +   ResourceId systemId,
      bytes memory callData
    ) external payable returns (bytes memory);
   
    // Same for all other methods
  }

feat(store): indexed tableId in store events (#1520) (opens in a new tab) (@latticexyz/store)

Store events now use an indexed tableId. This adds ~100 gas per write, but means we our sync stack can filter events by table.

feat(world,store): add initialize method, initialize core tables in core module (#1472) (opens in a new tab) (@latticexyz/store)

• StoreCore's initialize function is split into initialize (to set the StoreSwitch's storeAddress) and registerCoreTables (to register the Tables and StoreHooks tables). The purpose of this is to give consumers more granular control over the setup flow.

• The StoreRead contract no longer calls StoreCore.initialize in its constructor. StoreCore consumers are expected to call StoreCore.initialize and StoreCore.registerCoreTable in their own setup logic.

feat(store): add internalType property to user types config for type inference (#1587) (opens in a new tab) (@latticexyz/cli, @latticexyz/common, @latticexyz/store)

Changed the userTypes property to accept { filePath: string, internalType: SchemaAbiType } to enable strong type inference from the config.

refactor(world,world-modules): move optional modules from world to world-modules package (#1591) (opens in a new tab) (@latticexyz/cli, @latticexyz/world, @latticexyz/world-modules)

All optional modules have been moved from @latticexyz/world to @latticexyz/world-modules. If you're using the MUD CLI, the import is already updated and no changes are necessary.

feat(store,world): polish store methods (#1581) (opens in a new tab) (@latticexyz/block-logs-stream, @latticexyz/cli, @latticexyz/common, @latticexyz/dev-tools, @latticexyz/store-sync, @latticexyz/store, @latticexyz/world, create-mud)

• The external setRecord and deleteRecord methods of IStore no longer accept a FieldLayout as input, but load it from storage instead. This is to prevent invalid FieldLayout values being passed, which could cause the onchain state to diverge from the indexer state. However, the internal StoreCore library still exposes a setRecord and deleteRecord method that allows a FieldLayout to be passed. This is because StoreCore can only be used internally, so the FieldLayout value can be trusted and we can save the gas for accessing storage.

  interface IStore {
    function setRecord(
      ResourceId tableId,
      bytes32[] calldata keyTuple,
      bytes calldata staticData,
      PackedCounter encodedLengths,
      bytes calldata dynamicData,
  -   FieldLayout fieldLayout
    ) external;
   
    function deleteRecord(
      ResourceId tableId,
      bytes32[] memory keyTuple,
  -   FieldLayout fieldLayout
    ) external;
  }

• The spliceStaticData method and Store_SpliceStaticData event of IStore and StoreCore no longer include deleteCount in their signature. This is because when splicing static data, the data after start is always overwritten with data instead of being shifted, so deleteCount is always the length of the data to be written.

   
  event Store_SpliceStaticData(
    ResourceId indexed tableId,
    bytes32[] keyTuple,
    uint48 start,
  - uint40 deleteCount,
    bytes data
  );
   
  interface IStore {
    function spliceStaticData(
      ResourceId tableId,
      bytes32[] calldata keyTuple,
      uint48 start,
  -   uint40 deleteCount,
      bytes calldata data
    ) external;
  }

• The updateInField method has been removed from IStore, as it's almost identical to the more general spliceDynamicData. If you're manually calling updateInField, here is how to upgrade to spliceDynamicData:

  - store.updateInField(tableId, keyTuple, fieldIndex, startByteIndex, dataToSet, fieldLayout);
  + uint8 dynamicFieldIndex = fieldIndex - fieldLayout.numStaticFields();
  + store.spliceDynamicData(tableId, keyTuple, dynamicFieldIndex, uint40(startByteIndex), uint40(dataToSet.length), dataToSet);

• All other methods that are only valid for dynamic fields (pushToField, popFromField, getFieldSlice) have been renamed to make this more explicit (pushToDynamicField, popFromDynamicField, getDynamicFieldSlice).

  Their fieldIndex parameter has been replaced by a dynamicFieldIndex parameter, which is the index relative to the first dynamic field (i.e. dynamicFieldIndex = fieldIndex - numStaticFields). The FieldLayout parameter has been removed, as it was only used to calculate the dynamicFieldIndex in the method.

  interface IStore {
  - function pushToField(
  + function pushToDynamicField(
      ResourceId tableId,
      bytes32[] calldata keyTuple,
  -   uint8 fieldIndex,
  +   uint8 dynamicFieldIndex,
      bytes calldata dataToPush,
  -   FieldLayout fieldLayout
    ) external;
   
  - function popFromField(
  + function popFromDynamicField(
      ResourceId tableId,
      bytes32[] calldata keyTuple,
  -   uint8 fieldIndex,
  +   uint8 dynamicFieldIndex,
      uint256 byteLengthToPop,
  -   FieldLayout fieldLayout
    ) external;
   
  - function getFieldSlice(
  + function getDynamicFieldSlice(
      ResourceId tableId,
      bytes32[] memory keyTuple,
  -   uint8 fieldIndex,
  +   uint8 dynamicFieldIndex,
  -   FieldLayout fieldLayout,
      uint256 start,
      uint256 end
    ) external view returns (bytes memory data);
  }

• IStore has a new getDynamicFieldLength length method, which returns the byte length of the given dynamic field and doesn't require the FieldLayout.

  IStore {
  + function getDynamicFieldLength(
  +   ResourceId tableId,
  +   bytes32[] memory keyTuple,
  +   uint8 dynamicFieldIndex
  + ) external view returns (uint256);
  }
   

• IStore now has additional overloads for getRecord, getField, getFieldLength and setField that don't require a FieldLength to be passed, but instead load it from storage.

• IStore now exposes setStaticField and setDynamicField to save gas by avoiding the dynamic inference of whether the field is static or dynamic.

• The getDynamicFieldSlice method no longer accepts reading outside the bounds of the dynamic field. This is to avoid returning invalid data, as the data of a dynamic field is not deleted when the record is deleted, but only its length is set to zero.

Minor changes

feat(dev-tools): update actions to display function name instead of callFrom (#1497) (opens in a new tab) (@latticexyz/dev-tools)

Improved rendering of transactions that make calls via World's call and callFrom methods

feat(faucet): add faucet service (#1517) (opens in a new tab) (@latticexyz/faucet)

New package to run your own faucet service. We'll use this soon for our testnet in place of @latticexyz/services.

To run the faucet server:

• Add the package with pnpm add @latticexyz/faucet
• Add a .env file that has a RPC_HTTP_URL and FAUCET_PRIVATE_KEY (or pass the environment variables into the next command)
• Run pnpm faucet-server to start the server

You can also adjust the server's HOST (defaults to 0.0.0.0) and PORT (defaults to 3002). The tRPC routes are accessible under /trpc.

To connect a tRPC client, add the package with pnpm add @latticexyz/faucet and then use createClient:

import { createClient } from "@latticexyz/faucet";
 
const faucet = createClient({ url: "http://localhost:3002/trpc" });
 
await faucet.mutate.drip({ address: burnerAccount.address });

feat(world): add registerNamespaceDelegation for namespace-bound fallback delegation controls (#1590) (opens in a new tab) (@latticexyz/world)

It is now possible for namespace owners to register a fallback delegation control system for the namespace. This fallback delegation control system is used to verify a delegation in IBaseWorld.callFrom, after the user's individual and fallback delegations have been checked.

IBaseWorld {
  function registerNamespaceDelegation(
    ResourceId namespaceId,
    ResourceId delegationControlId,
    bytes memory initCallData
  ) external;
}

feat: move forge build + abi + abi-ts to out (#1483) (opens in a new tab) (create-mud)

Templates now use out for their forge build artifacts, including ABIs. If you have a project created from a previous template, you can update your packages/contracts/package.json with:

- "build:abi": "rimraf abi && forge build --extra-output-files abi --out abi --skip test script MudTest.sol",
- "build:abi-ts": "mud abi-ts --input 'abi/IWorld.sol/IWorld.abi.json' && prettier --write '**/*.abi.json.d.ts'",
+ "build:abi": "forge clean && forge build --skip test script",
+ "build:abi-ts": "mud abi-ts && prettier --write '**/*.abi.json.d.ts'",

And your packages/client/src/mud/setupNetwork with:

- import IWorldAbi from "contracts/abi/IWorld.sol/IWorld.abi.json";
+ import IWorldAbi from "contracts/out/IWorld.sol/IWorld.abi.json";

feat(common,store): add support for user-defined types (#1566) (opens in a new tab) (@latticexyz/common)

• Add getRemappings to get foundry remappings as an array of [to, from] tuples.
• Add extractUserTypes solidity parser utility to extract user-defined types.
• Add loadAndExtractUserTypes helper to load and parse a solidity file, extracting user-defined types.

feat(store-indexer): run indexers with npx (#1526) (opens in a new tab) (@latticexyz/store-indexer)

You can now install and run @latticexyz/store-indexer from the npm package itself, without having to clone/build the MUD repo:

npm install @latticexyz/store-indexer
 
npm sqlite-indexer
# or
npm postgres-indexer

or

npx -p @latticexyz/store-indexer sqlite-indexer
# or
npx -p @latticexyz/store-indexer postgres-indexer

The binary will also load the nearby .env file for easier local configuration.

We've removed the CHAIN_ID requirement and instead require just a RPC_HTTP_URL or RPC_WS_URL or both. You can now also adjust the polling interval with POLLING_INTERVAL (defaults to 1000ms, which corresponds to MUD's default block time).

feat(store,): add splice events (#1354) (opens in a new tab) (@latticexyz/common)

spliceHex was added, which has a similar API as JavaScript's Array.prototype.splice (opens in a new tab), but for Hex strings.

spliceHex("0x123456", 1, 1, "0x0000"); // "0x12000056"

feat(protoocl-parser): add valueSchemaToFieldLayoutHex (#1476) (opens in a new tab) (@latticexyz/protocol-parser)

Adds valueSchemaToFieldLayoutHex helper

feat(store,world): emit Store/World versions (#1511) (opens in a new tab) (@latticexyz/store, @latticexyz/world)

Add protocol version with corresponding getter and event on deploy

world.worldVersion();
world.storeVersion(); // a World is also a Store

event HelloWorld(bytes32 indexed worldVersion);
event HelloStore(bytes32 indexed storeVersion);

feat(store): expose getStaticField and getDynamicField on IStore and use it in codegen tables (#1521) (opens in a new tab) (@latticexyz/cli, @latticexyz/store, @latticexyz/world)

StoreCore and IStore now expose specific functions for getStaticField and getDynamicField in addition to the general getField. Using the specific functions reduces gas overhead because more optimized logic can be executed.

interface IStore {
  /**
   * Get a single static field from the given tableId and key tuple, with the given value field layout.
   * Note: the field value is left-aligned in the returned bytes32, the rest of the word is not zeroed out.
   * Consumers are expected to truncate the returned value as needed.
   */
  function getStaticField(
    bytes32 tableId,
    bytes32[] calldata keyTuple,
    uint8 fieldIndex,
    FieldLayout fieldLayout
  ) external view returns (bytes32);
 
  /**
   * Get a single dynamic field from the given tableId and key tuple at the given dynamic field index.
   * (Dynamic field index = field index - number of static fields)
   */
  function getDynamicField(
    bytes32 tableId,
    bytes32[] memory keyTuple,
    uint8 dynamicFieldIndex
  ) external view returns (bytes memory);
}

refactor(store): inline logic in codegenned set method which uses struct (#1542) (opens in a new tab) (@latticexyz/store)

Add an optional namePrefix argument to renderRecordData, to support inlined logic in codegenned set method which uses a struct.

feat(store): indexed tableId in store events (#1520) (opens in a new tab) (@latticexyz/cli, @latticexyz/common, @latticexyz/store, @latticexyz/world)

Generated table libraries now have a set of functions prefixed with _ that always use their own storage for read/write. This saves gas for use cases where the functionality to dynamically determine which Store to use for read/write is not needed, e.g. root systems in a World, or when using Store without World.

We decided to continue to always generate a set of functions that dynamically decide which Store to use, so that the generated table libraries can still be imported by non-root systems.

library Counter {
  // Dynamically determine which store to write to based on the context
  function set(uint32 value) internal;
 
  // Always write to own storage
  function _set(uint32 value) internal;
 
  // ... equivalent functions for all other Store methods
}

feat(world,store): add initialize method, initialize core tables in core module (#1472) (opens in a new tab) (@latticexyz/cli, @latticexyz/world)

• The World contract now has an initialize function, which can be called once by the creator of the World to install the core module. This change allows the registration of all core tables to happen in the CoreModule, so no table metadata has to be included in the World's bytecode.

  interface IBaseWorld {
    function initialize(IModule coreModule) public;
  }

• The World contract now stores the original creator of the World in an immutable state variable. It is used internally to only allow the original creator to initialize the World in a separate transaction.

  interface IBaseWorld {
    function creator() external view returns (address);
  }

• The deploy script is updated to use the World's initialize function to install the CoreModule instead of registerRootModule as before.

feat(world): add CallBatchSystem to core module (#1500) (opens in a new tab) (@latticexyz/world)

The World now has a callBatch method which allows multiple system calls to be batched into a single transaction.

import { SystemCallData } from "@latticexyz/world/modules/core/types.sol";
 
interface IBaseWorld {
  function callBatch(SystemCallData[] calldata systemCalls) external returns (bytes[] memory returnDatas);
}

Patch changes

fix(store-indexer): subscribe postgres indexer to stream (#1514) (opens in a new tab) (@latticexyz/store-indexer)

Fixes postgres indexer stopping sync after it catches up to the latest block.

fix: release bytecode on npm and import abi in cli deploy (#1490) (opens in a new tab) (@latticexyz/cli, @latticexyz/store, @latticexyz/world)

Include bytecode for World and Store in npm packages.

refactor(store,world): move test table config out of main table config (#1600) (opens in a new tab) (@latticexyz/store, @latticexyz/world)

Moved the test tables out of the main config in world and store and into their own separate config.

fix(common): always import relative sol files from ./ (#1585) (opens in a new tab) (@latticexyz/common)

Minor fix to resolving user types: solc doesn't like relative imports without ./, but is fine with relative imports from ./../, so we always append ./ to the relative path.

feat(store): compute FieldLayout at compile time (#1508) (opens in a new tab) (@latticexyz/cli, @latticexyz/store, @latticexyz/world)

The FieldLayout in table libraries is now generated at compile time instead of dynamically in a table library function. This significantly reduces gas cost in all table library functions.

feat(store): add Storage.loadField for optimized loading of 32 bytes or less from storage (#1512) (opens in a new tab) (@latticexyz/store)

Added Storage.loadField to optimize loading 32 bytes or less from storage (which is always the case when loading data for static fields).

refactor(store,world): prefix errors with library/contract name (#1568) (opens in a new tab) (@latticexyz/store, @latticexyz/world)

Prefixed all errors with their respective library/contract for improved debugging.

refactor(world): remove workaround in mud config (#1501) (opens in a new tab) (@latticexyz/world)

Remove a workaround for the internal InstalledModules table that is not needed anymore.

feat(world): rename funcSelectorAndArgs to callData (#1524) (opens in a new tab) (@latticexyz/world)

Renamed all funcSelectorAndArgs arguments to callData for clarity.

fix(faucet,store-indexer): fix invalid env message (#1546) (opens in a new tab) (@latticexyz/faucet, @latticexyz/store-indexer)

Improves error message when parsing env variables

feat(store,world): replace ResourceSelector with ResourceId and WorldResourceId (#1544) (opens in a new tab) (@latticexyz/world, @latticexyz/store)

The ResourceType table is removed. It was previously used to store the resource type for each resource ID in a World. This is no longer necessary as the resource type is now encoded in the resource ID (opens in a new tab).

To still be able to determine whether a given resource ID exists, a ResourceIds table has been added. The previous ResourceType table was part of World and missed tables that were registered directly via StoreCore.registerTable instead of via World.registerTable (e.g. when a table was registered as part of a root module). This problem is solved by the new table ResourceIds being part of Store.

StoreCore's hasTable function was removed in favor of using ResourceIds.getExists(tableId) directly.

- import { ResourceType } from "@latticexyz/world/src/tables/ResourceType.sol";
- import { StoreCore } from "@latticexyz/store/src/StoreCore.sol";
+ import { ResourceIds } from "@latticexyz/store/src/codegen/tables/ResourceIds.sol";
 
- bool tableExists = StoreCore.hasTable(tableId);
+ bool tableExists = ResourceIds.getExists(tableId);
 
- bool systemExists = ResourceType.get(systemId) != Resource.NONE;
+ bool systemExists = ResourceIds.getExists(systemId);

feat: rename table to tableId (#1484) (opens in a new tab) (@latticexyz/block-logs-stream, @latticexyz/store-sync, @latticexyz/store)

Renamed all occurrences of table where it is used as "table ID" to tableId. This is only a breaking change for consumers who manually decode Store events, but not for consumers who use the MUD libraries.

event StoreSetRecord(
- bytes32 table,
+ bytes32 tableId,
  bytes32[] key,
  bytes data
);
 
event StoreSetField(
- bytes32 table,
+ bytes32 tableId,
  bytes32[] key,
  uint8 fieldIndex,
  bytes data
);
 
event StoreDeleteRecord(
- bytes32 table,
+ bytes32 tableId,
  bytes32[] key
);
 
event StoreEphemeralRecord(
- bytes32 table,
+ bytes32 tableId,
  bytes32[] key,
  bytes data
);

docs: cli changeset after deploy changes (#1503) (opens in a new tab) (@latticexyz/cli)

Refactor deploy command to break up logic into modules

feat: rename key to keyTuple (#1492) (opens in a new tab) (@latticexyz/block-logs-stream, @latticexyz/store-sync, @latticexyz/store, @latticexyz/world)

Renamed all occurrences of key where it is used as "key tuple" to keyTuple. This is only a breaking change for consumers who manually decode Store events, but not for consumers who use the MUD libraries.

event StoreSetRecord(
  bytes32 tableId,
- bytes32[] key,
+ bytes32[] keyTuple,
  bytes data
);
 
event StoreSetField(
  bytes32 tableId,
- bytes32[] key,
+ bytes32[] keyTuple,
  uint8 fieldIndex,
  bytes data
);
 
event StoreDeleteRecord(
  bytes32 tableId,
- bytes32[] key,
+ bytes32[] keyTuple,
);
 
event StoreEphemeralRecord(
  bytes32 tableId,
- bytes32[] key,
+ bytes32[] keyTuple,
  bytes data
);

fix(protocol-parser): export valueSchemaToFieldLayoutHex (#1481) (opens in a new tab) (@latticexyz/protocol-parser)

Export valueSchemaToFieldLayoutHex helper

fix(world): register Delegations table in CoreModule (#1452) (opens in a new tab) (@latticexyz/world)

Register Delegations table in the CoreModule

fix(store-indexer): catch errors when parsing logs to tables and storage operations (#1488) (opens in a new tab) (@latticexyz/store-sync)

Catch errors when parsing logs to tables and storage operations, log and skip

refactor(store): rename Utils.sol to leftMask.sol and minor cleanup (#1599) (opens in a new tab) (@latticexyz/store)

Minor Store cleanups: renamed Utils.sol to leftMask.sol since it only contains a single free function, and removed a leftover sanity check.

feat(store,world): use user-types for ResourceId, FieldLayout and Schema in table libraries (#1586) (opens in a new tab) (@latticexyz/store-sync, @latticexyz/store, @latticexyz/world)

All Store and World tables now use the appropriate user-types for ResourceId, FieldLayout and Schema to avoid manual wrap/unwrap.

feat(store): optimize storage location hash (#1509) (opens in a new tab) (@latticexyz/store, @latticexyz/world)

Optimized the StoreCore hash function determining the data location to use less gas.

fix(dev-tools): key -> keyTuple (#1505) (opens in a new tab) (@latticexyz/dev-tools)

Updates store event key reference to keyTuple

fix(dev-tools): table -> tableId (#1502) (opens in a new tab) (@latticexyz/dev-tools)

Updates table reference to tableId

feat: move forge build + abi + abi-ts to out (#1483) (opens in a new tab) (@latticexyz/cli)

deploy and dev-contracts CLI commands now use forge build --skip test script before deploying and run mud abi-ts to generate strong types for ABIs.

refactor(store-indexer): add readme, refactor common env (#1533) (opens in a new tab) (@latticexyz/store-indexer)

Added README and refactored handling of common environment variables

refactor(store,world): simplify constants (#1569) (opens in a new tab) (@latticexyz/store, @latticexyz/world)

Simplified a couple internal constants used for bitshifting.

docs(faucet): add readme (#1534) (opens in a new tab) (@latticexyz/faucet)

Added README

fix(common): fix memory corruption for dynamic to static array conversion (#1598) (opens in a new tab) (@latticexyz/cli, @latticexyz/common)

Table libraries now correctly handle uninitialized fixed length arrays.

Version 2.0.0-next.8

Major changes

feat(world,store): add ERC165 checks for all registration methods (#1458) (opens in a new tab) (@latticexyz/store, @latticexyz/world)

The World now performs ERC165 interface checks to ensure that the StoreHook, SystemHook, System, DelegationControl and Module contracts to actually implement their respective interfaces before registering them in the World.

The required supportsInterface methods are implemented on the respective base contracts. When creating one of these contracts, the recommended approach is to extend the base contract rather than the interface.

- import { IStoreHook } from "@latticexyz/store/src/IStore.sol";
+ import { StoreHook } from "@latticexyz/store/src/StoreHook.sol";
 
- contract MyStoreHook is IStoreHook {}
+ contract MyStoreHook is StoreHook {}

- import { ISystemHook } from "@latticexyz/world/src/interfaces/ISystemHook.sol";
+ import { SystemHook } from "@latticexyz/world/src/SystemHook.sol";
 
- contract MySystemHook is ISystemHook {}
+ contract MySystemHook is SystemHook {}

- import { IDelegationControl } from "@latticexyz/world/src/interfaces/IDelegationControl.sol";
+ import { DelegationControl } from "@latticexyz/world/src/DelegationControl.sol";
 
- contract MyDelegationControl is IDelegationControl {}
+ contract MyDelegationControl is DelegationControl {}

- import { IModule } from "@latticexyz/world/src/interfaces/IModule.sol";
+ import { Module } from "@latticexyz/world/src/Module.sol";
 
- contract MyModule is IModule {}
+ contract MyModule is Module {}

feat(world): change requireOwnerOrSelf to requireOwner (#1457) (opens in a new tab) (@latticexyz/world)

• The access control library no longer allows calls by the World contract to itself to bypass the ownership check. This is a breaking change for root modules that relied on this mechanism to register root tables, systems or function selectors. To upgrade, root modules must use delegatecall instead of a regular call to install root tables, systems or function selectors.

  - world.registerSystem(rootSystemId, rootSystemAddress);
  + address(world).delegatecall(abi.encodeCall(world.registerSystem, (rootSystemId, rootSystemAddress)));

• An installRoot method was added to the IModule interface. This method is now called when installing a root module via world.installRootModule. When installing non-root modules via world.installModule, the module's install function continues to be called.

feat(world): add Balance table and BalanceTransferSystem (#1425) (opens in a new tab) (@latticexyz/world)

The World now maintains a balance per namespace. When a system is called with value, the value stored in the World contract and credited to the system's namespace.

Previously, the World contract did not store value, but passed it on to the system contracts. However, as systems are expected to be stateless (reading/writing state only via the calling World) and can be registered in multiple Worlds, this could have led to exploits.

Any address with access to a namespace can use the balance of that namespace. This allows all systems registered in the same namespace to work with the same balance.

There are two new World methods to transfer balance between namespaces (transferBalanceToNamespace) or to an address (transferBalanceToAddress).

interface IBaseWorld {
  function transferBalanceToNamespace(bytes16 fromNamespace, bytes16 toNamespace, uint256 amount) external;
 
  function transferBalanceToAddress(bytes16 fromNamespace, address toAddress, uint256 amount) external;
}

Minor changes

feat(store,world): add ability to unregister hooks (#1422) (opens in a new tab) (@latticexyz/store, @latticexyz/world)

It is now possible to unregister Store hooks and System hooks.

interface IStore {
  function unregisterStoreHook(bytes32 table, IStoreHook hookAddress) external;
  // ...
}
 
interface IWorld {
  function unregisterSystemHook(bytes32 resourceSelector, ISystemHook hookAddress) external;
  // ...
}

feat(protocol-parser): add keySchema/valueSchema helpers (#1443) (opens in a new tab) (@latticexyz/store)

Moved KeySchema, ValueSchema, SchemaToPrimitives and TableRecord types into @latticexyz/protocol-parser

feat(protocol-parser): add keySchema/valueSchema helpers (#1443) (opens in a new tab) (@latticexyz/protocol-parser)

Adds decodeKey, decodeValue, encodeKey, and encodeValue helpers to decode/encode from key/value schemas. Deprecates previous methods that use a schema object with static/dynamic field arrays, originally attempting to model our on-chain behavior but ended up not very ergonomic when working with table configs.

Version 2.0.0-next.7

Major changes

feat(store,world): more granularity for onchain hooks (#1399) (opens in a new tab) (@latticexyz/store, @latticexyz/world)

• The onSetRecord hook is split into onBeforeSetRecord and onAfterSetRecord and the onDeleteRecord hook is split into onBeforeDeleteRecord and onAfterDeleteRecord. The purpose of this change is to allow more fine-grained control over the point in the lifecycle at which hooks are executed.

  The previous hooks were executed before modifying data, so they can be replaced with the respective onBefore hooks.

  - function onSetRecord(
  + function onBeforeSetRecord(
      bytes32 table,
      bytes32[] memory key,
      bytes memory data,
      Schema valueSchema
    ) public;
   
  - function onDeleteRecord(
  + function onBeforeDeleteRecord(
      bytes32 table,
      bytes32[] memory key,
      Schema valueSchema
    ) public;

• It is now possible to specify which methods of a hook contract should be called when registering a hook. The purpose of this change is to save gas by avoiding to call no-op hook methods.

  function registerStoreHook(
    bytes32 tableId,
  - IStoreHook hookAddress
  + IStoreHook hookAddress,
  + uint8 enabledHooksBitmap
  ) public;
   
  function registerSystemHook(
    bytes32 systemId,
  - ISystemHook hookAddress
  + ISystemHook hookAddress,
  + uint8 enabledHooksBitmap
  ) public;

  There are StoreHookLib and SystemHookLib with helper functions to encode the bitmap of enabled hooks.

  import { StoreHookLib } from "@latticexyz/store/src/StoreHook.sol";
   
  uint8 storeHookBitmap = StoreBookLib.encodeBitmap({
    onBeforeSetRecord: true,
    onAfterSetRecord: true,
    onBeforeSetField: true,
    onAfterSetField: true,
    onBeforeDeleteRecord: true,
    onAfterDeleteRecord: true
  });

  import { SystemHookLib } from "@latticexyz/world/src/SystemHook.sol";
   
  uint8 systemHookBitmap = SystemHookLib.encodeBitmap({
    onBeforeCallSystem: true,
    onAfterCallSystem: true
  });

• The onSetRecord hook call for emitEphemeralRecord has been removed to save gas and to more clearly distinguish ephemeral tables as offchain tables.

Patch changes

fix(abi-ts): remove cwd join (#1418) (opens in a new tab) (@latticexyz/abi-ts)

Let glob handle resolving the glob against the current working directory.

feat(world): allow callFrom from own address without explicit delegation (#1407) (opens in a new tab) (@latticexyz/world)

Allow callFrom with the own address as delegator without requiring an explicit delegation

Version 2.0.0-next.6

Major changes

style(gas-report): rename mud-gas-report to gas-report (#1410) (opens in a new tab) (@latticexyz/gas-report)

Renames mud-gas-report binary to gas-report, since it's no longer MUD specific.

Minor changes

docs: rework abi-ts changesets (#1413) (opens in a new tab) (@latticexyz/abi-ts, @latticexyz/cli)

Added a new @latticexyz/abi-ts package to generate TS type declaration files (.d.ts) for each ABI JSON file.

This allows you to import your JSON ABI and use it directly with libraries like viem (opens in a new tab) and abitype (opens in a new tab).

pnpm add @latticexyz/abi-ts
pnpm abi-ts

By default, abi-ts looks for files with the glob **/*.abi.json, but you can customize this glob with the --input argument, e.g.

pnpm abi-ts --input 'abi/IWorld.sol/IWorld.abi.json'

docs: rework abi-ts changesets (#1413) (opens in a new tab) (create-mud)

We now use @latticexyz/abi-ts to generate TS type declaration files (.d.ts) for each ABI JSON file. This replaces our usage TypeChain everywhere.

If you have a MUD project created from an older template, you can replace TypeChain with abi-ts by first updating your contracts' package.json:

-"build": "pnpm run build:mud && pnpm run build:abi && pnpm run build:typechain",
+"build": "pnpm run build:mud && pnpm run build:abi && pnpm run build:abi-ts",
-"build:abi": "forge clean && forge build",
+"build:abi": "rimraf abi && forge build --extra-output-files abi --out abi --skip test script MudTest.sol",
+"build:abi-ts": "mud abi-ts --input 'abi/IWorld.sol/IWorld.abi.json' && prettier --write '**/*.abi.json.d.ts'",
 "build:mud": "mud tablegen && mud worldgen",
-"build:typechain": "rimraf types && typechain --target=ethers-v5 out/IWorld.sol/IWorld.json",

And update your client's setupNetwork.ts with:

-import { IWorld__factory } from "contracts/types/ethers-contracts/factories/IWorld__factory";
+import IWorldAbi from "contracts/abi/IWorld.sol/IWorld.abi.json";
 
 const worldContract = createContract({
   address: networkConfig.worldAddress as Hex,
-  abi: IWorld__factory.abi,
+  abi: IWorldAbi,

docs: rework abi-ts changesets (#1413) (opens in a new tab) (@latticexyz/store, @latticexyz/world)

We now use @latticexyz/abi-ts to generate TS type declaration files (.d.ts) for each ABI JSON file. This replaces our usage TypeChain everywhere.

If you previously relied on TypeChain types from @latticexyz/store or @latticexyz/world, you will either need to migrate to viem or abitype using ABI JSON imports or generate TypeChain types from our exported ABI JSON files.

import { getContract } from "viem";
import IStoreAbi from "@latticexyz/store/abi/IStore.sol/IStore.abi.json";
 
const storeContract = getContract({
  abi: IStoreAbi,
  ...
});
 
await storeContract.write.setRecord(...);

Version 2.0.0-next.5

Major changes

refactor(world): separate call utils into WorldContextProvider and SystemCall (#1370) (opens in a new tab) (@latticexyz/world)

• The previous Call.withSender util is replaced with WorldContextProvider, since the usecase of appending the msg.sender to the calldata is tightly coupled with WorldContextConsumer (which extracts the appended context from the calldata).

  The previous Call.withSender utility reverted if the call failed and only returned the returndata on success. This is replaced with callWithContextOrRevert/delegatecallWithContextOrRevert

  -import { Call } from "@latticexyz/world/src/Call.sol";
  +import { WorldContextProvider } from "@latticexyz/world/src/WorldContext.sol";
   
  -Call.withSender({
  -  delegate: false,
  -  value: 0,
  -  ...
  -});
  +WorldContextProvider.callWithContextOrRevert({
  +  value: 0,
  +  ...
  +});
   
  -Call.withSender({
  -  delegate: true,
  -  value: 0,
  -  ...
  -});
  +WorldContextProvider.delegatecallWithContextOrRevert({
  +  ...
  +});

  In addition there are utils that return a bool success flag instead of reverting on errors. This mirrors the behavior of Solidity's low level call/delegatecall functions and is useful in situations where additional logic should be executed in case of a reverting external call.

  library WorldContextProvider {
    function callWithContext(
      address target, // Address to call
      bytes memory funcSelectorAndArgs, // Abi encoded function selector and arguments to pass to pass to the contract
      address msgSender, // Address to append to the calldata as context for msgSender
      uint256 value // Value to pass with the call
    ) internal returns (bool success, bytes memory data);
   
    function delegatecallWithContext(
      address target, // Address to call
      bytes memory funcSelectorAndArgs, // Abi encoded function selector and arguments to pass to pass to the contract
      address msgSender // Address to append to the calldata as context for msgSender
    ) internal returns (bool success, bytes memory data);
  }

• WorldContext is renamed to WorldContextConsumer to clarify the relationship between WorldContextProvider (appending context to the calldata) and WorldContextConsumer (extracting context from the calldata)

  -import { WorldContext } from "@latticexyz/world/src/WorldContext.sol";
  -import { WorldContextConsumer } from "@latticexyz/world/src/WorldContext.sol";

• The World contract previously had a _call method to handle calling systems via their resource selector, performing accesss control checks and call hooks registered for the system.

  library SystemCall {
    /**
     * Calls a system via its resource selector and perform access control checks.
     * Does not revert if the call fails, but returns a `success` flag along with the returndata.
     */
    function call(
      address caller,
      bytes32 resourceSelector,
      bytes memory funcSelectorAndArgs,
      uint256 value
    ) internal returns (bool success, bytes memory data);
   
    /**
     * Calls a system via its resource selector, perform access control checks and trigger hooks registered for the system.
     * Does not revert if the call fails, but returns a `success` flag along with the returndata.
     */
    function callWithHooks(
      address caller,
      bytes32 resourceSelector,
      bytes memory funcSelectorAndArgs,
      uint256 value
    ) internal returns (bool success, bytes memory data);
   
    /**
     * Calls a system via its resource selector, perform access control checks and trigger hooks registered for the system.
     * Reverts if the call fails.
     */
    function callWithHooksOrRevert(
      address caller,
      bytes32 resourceSelector,
      bytes memory funcSelectorAndArgs,
      uint256 value
    ) internal returns (bytes memory data);
  }

• System hooks now are called with the system's resource selector instead of its address. The system's address can still easily obtained within the hook via Systems.get(resourceSelector) if necessary.

  interface ISystemHook {
    function onBeforeCallSystem(
      address msgSender,
  -   address systemAddress,
  +   bytes32 resourceSelector,
      bytes memory funcSelectorAndArgs
    ) external;
   
    function onAfterCallSystem(
      address msgSender,
  -   address systemAddress,
  +   bytes32 resourceSelector,
      bytes memory funcSelectorAndArgs
    ) external;
  }

Minor changes

feat(world): add support for upgrading systems (#1378) (opens in a new tab) (@latticexyz/world)

It is now possible to upgrade systems by calling registerSystem again with an existing system id (resource selector).

// Register a system
world.registerSystem(systemId, systemAddress, publicAccess);
 
// Upgrade the system by calling `registerSystem` with the
// same system id but a new system address or publicAccess flag
world.registerSystem(systemId, newSystemAddress, newPublicAccess);

feat(world): add callFrom entry point (#1364) (opens in a new tab) (@latticexyz/world)

The World has a new callFrom entry point which allows systems to be called on behalf of other addresses if those addresses have registered a delegation. If there is a delegation, the call is forwarded to the system with delegator as msgSender.

interface IBaseWorld {
  function callFrom(
    address delegator,
    bytes32 resourceSelector,
    bytes memory funcSelectorAndArgs
  ) external payable virtual returns (bytes memory);
}

A delegation can be registered via the World's registerDelegation function. If delegatee is address(0), the delegation is considered to be a "fallback" delegation and is used in callFrom if there is no delegation is found for the specific caller. Otherwise the delegation is registered for the specific delegatee.

interface IBaseWorld {
  function registerDelegation(
    address delegatee,
    bytes32 delegationControl,
    bytes memory initFuncSelectorAndArgs
  ) external;
}

The delegationControl refers to the resource selector of a DelegationControl system that must have been registered beforehand. As part of registering the delegation, the DelegationControl system is called with the provided initFuncSelectorAndArgs. This can be used to initialize data in the given DelegationControl system.

The DelegationControl system must implement the IDelegationControl interface:

interface IDelegationControl {
  function verify(address delegator, bytes32 systemId, bytes calldata funcSelectorAndArgs) external returns (bool);
}

When callFrom is called, the World checks if a delegation is registered for the given caller, and if so calls the delegation control's verify function with the same same arguments as callFrom. If the call to verify is successful and returns true, the delegation is valid and the call is forwarded to the system with delegator as msgSender.

Note: if UNLIMITED_DELEGATION (from @latticexyz/world/src/constants.sol) is passed as delegationControl, the external call to the delegation control contract is skipped and the delegation is considered valid.

For examples of DelegationControl systems, check out the CallboundDelegationControl or TimeboundDelegationControl systems in the std-delegations module. See StandardDelegations.t.sol for usage examples.

feat(world): allow transferring ownership of namespaces (#1274) (opens in a new tab) (@latticexyz/world)

It is now possible to transfer ownership of namespaces!

// Register a new namespace
world.registerNamespace("namespace");
// It's owned by the caller of the function (address(this))
 
// Transfer ownership of the namespace to address(42)
world.transferOwnership("namespace", address(42));
// It's now owned by address(42)

Patch changes

fix(services): correctly export typescript types (#1377) (opens in a new tab) (@latticexyz/services)

Fixed an issue where the TypeScript types for createFaucetService were not exported correctly from the @latticexyz/services package

feat: docker monorepo build (#1219) (opens in a new tab) (@latticexyz/services)

The build phase of services now works on machines with older protobuf compilers

refactor: remove v1 network package, remove snap sync module, deprecate std-client (#1311) (opens in a new tab) (@latticexyz/common, @latticexyz/store, @latticexyz/world)

• Refactor tightcoder to use typescript functions instead of ejs
• Optimize TightCoder library
• Add isLeftAligned and getLeftPaddingBits common codegen helpers

fix(cli): make mud test exit with code 1 on test error (#1371) (opens in a new tab) (@latticexyz/cli)

The mud test cli now exits with code 1 on test failure. It used to exit with code 0, which meant that CIs didn't notice test failures.

Version 2.0.0-next.4

Major changes

docs: changeset for deleted network package (#1348) (opens in a new tab) (@latticexyz/network)

Removes network package. Please see the changelog (opens in a new tab) for how to migrate your app to the new store-sync package. Or create a new project from an up-to-date template with pnpm create mud@next your-app-name.

chore: delete std-contracts package (#1341) (opens in a new tab) (@latticexyz/cli, @latticexyz/std-contracts)

Removes std-contracts package. These were v1 contracts, now entirely replaced by our v2 tooling. See the MUD docs (opens in a new tab) for building with v2 or create a new project from our v2 templates with pnpm create mud@next your-app-name.

chore: delete solecs package (#1340) (opens in a new tab) (@latticexyz/cli, @latticexyz/recs, @latticexyz/solecs, @latticexyz/std-client)

Removes solecs package. These were v1 contracts, now entirely replaced by our v2 tooling. See the MUD docs (opens in a new tab) for building with v2 or create a new project from our v2 templates with pnpm create mud@next your-app-name.

feat(recs,std-client): move action system to recs (#1351) (opens in a new tab) (@latticexyz/recs, @latticexyz/std-client)

• Moved createActionSystem from std-client to recs package and updated it to better support v2 sync stack.

  If you want to use createActionSystem alongside syncToRecs, you'll need to pass in arguments like so:

  import { syncToRecs } from "@latticexyz/store-sync/recs";
  import { createActionSystem } from "@latticexyz/recs/deprecated";
  import { from, mergeMap } from "rxjs";
   
  const { blockLogsStorage$, waitForTransaction } = syncToRecs({
    world,
    ...
  });
   
  const txReduced$ = blockLogsStorage$.pipe(
    mergeMap(({ operations }) => from(operations.map((op) => op.log?.transactionHash).filter(isDefined)))
  );
   
  const actionSystem = createActionSystem(world, txReduced$, waitForTransaction);

• Fixed a bug in waitForComponentValueIn that caused the promise to not resolve if the component value was already set when the function was called.

• Fixed a bug in createActionSystem that caused optimistic updates to be incorrectly propagated to requirement checks. To fix the bug, you must now pass in the full component object to the action's updates instead of just the component name.

    actions.add({
      updates: () => [
        {
  -       component: "Resource",
  +       component: Resource,
          ...
        }
      ],
      ...
    });

chore: delete std-client package (#1342) (opens in a new tab) (@latticexyz/std-client)

Removes std-client package. Please see the changelog (opens in a new tab) for how to migrate your app to the new store-sync package. Or create a new project from an up-to-date template with pnpm create mud@next your-app-name.

chore: delete ecs-browser package (#1339) (opens in a new tab) (@latticexyz/ecs-browser)

Removes ecs-browser package. This has now been replaced by dev-tools, which comes out-of-the-box when creating a new MUD app from the templates (pnpm create mud@next your-app-name). We'll be adding deeper RECS support (querying for entities) in a future release.

chore: delete store-cache package (#1343) (opens in a new tab) (@latticexyz/store-cache)

Removes store-cache package. Please see the changelog (opens in a new tab) for how to migrate your app to the new store-sync package. Or create a new project from an up-to-date template with pnpm create mud@next your-app-name.

If you need reactivity, we recommend using recs package and syncToRecs. We'll be adding reactivity to syncToSqlite in a future release.

chore: delete store-cache package (#1343) (opens in a new tab) (@latticexyz/react)

Removes useRow and useRows hooks, previously powered by store-cache, which is now deprecated. Please use recs and the corresponding useEntityQuery and useComponentValue hooks. We'll have more hooks soon for SQL.js sync backends.

Version 2.0.0-next.3

Major changes

feat(world, store): stop loading schema from storage, require schema as an argument (#1174) (opens in a new tab) (@latticexyz/cli, @latticexyz/store, @latticexyz/world, create-mud)

All Store methods now require the table's value schema to be passed in as an argument instead of loading it from storage. This decreases gas cost and removes circular dependencies of the Schema table (where it was not possible to write to the Schema table before the Schema table was registered).

  function setRecord(
    bytes32 table,
    bytes32[] calldata key,
    bytes calldata data,
+   Schema valueSchema
  ) external;

The same diff applies to getRecord, getField, setField, pushToField, popFromField, updateInField, and deleteRecord.

This change only requires changes in downstream projects if the Store methods were accessed directly. In most cases it is fully abstracted in the generated table libraries, so downstream projects only need to regenerate their table libraries after updating MUD.

refactor(world): combine name and namespace to resource selector in World methods (#1208) (opens in a new tab) (@latticexyz/cli, @latticexyz/world)

• All World function selectors that previously had bytes16 namespace, bytes16 name arguments now use bytes32 resourceSelector instead. This includes setRecord, setField, pushToField, popFromField, updateInField, deleteRecord, call, grantAccess, revokeAccess, registerTable, registerStoreHook, registerSystemHook, registerFunctionSelector, registerSystem and registerRootFunctionSelector. This change aligns the World function selectors with the Store function selectors, reduces clutter, reduces gas cost and reduces the World's contract size.

• The World's registerHook function is removed. Use registerStoreHook or registerSystemHook instead.

• The deploy script is updated to integrate the World interface changes

refactor: remove v1 network package, remove snap sync module, deprecate std-client (#1311) (opens in a new tab) (@latticexyz/world)

The SnapSyncModule is removed. The recommended way of loading the initial state of a MUD app is via the new store-indexer (opens in a new tab). Loading state via contract getter functions is not recommended, as it's computationally heavy on the RPC, can't be cached, and is an easy way to shoot yourself in the foot with exploding RPC costs.

The @latticexyz/network package was deprecated and is now removed. All consumers should upgrade to the new sync stack from @latticexyz/store-sync.

refactor(store): optimize PackedCounter (#1231) (opens in a new tab) (@latticexyz/cli, @latticexyz/protocol-parser, @latticexyz/services, @latticexyz/store-sync, @latticexyz/store, @latticexyz/world)

Reverse PackedCounter encoding, to optimize gas for bitshifts. Ints are right-aligned, shifting using an index is straightforward if they are indexed right-to-left.

• Previous encoding: (7 bytes | accumulator),(5 bytes | counter 1),...,(5 bytes | counter 5)
• New encoding: (5 bytes | counter 5),...,(5 bytes | counter 1),(7 bytes | accumulator)

feat(store,world): combine schema and metadata registration, rename getSchema to getValueSchema, change Schema table id (#1182) (opens in a new tab) (@latticexyz/cli, @latticexyz/store, @latticexyz/world, @latticexyz/store-sync, create-mud)

• Store's internal schema table is now a normal table instead of using special code paths. It is renamed to Tables, and the table ID changed from mudstore:schema to mudstore:Tables

• Store's registerSchema and setMetadata are combined into a single registerTable method. This means metadata (key names, field names) is immutable and indexers can create tables with this metadata when a new table is registered on-chain.

  -  function registerSchema(bytes32 table, Schema schema, Schema keySchema) external;
  -
  -  function setMetadata(bytes32 table, string calldata tableName, string[] calldata fieldNames) external;
   
  +  function registerTable(
  +    bytes32 table,
  +    Schema keySchema,
  +    Schema valueSchema,
  +    string[] calldata keyNames,
  +    string[] calldata fieldNames
  +  ) external;

• World's registerTable method is updated to match the Store interface, setMetadata is removed

• The getSchema method is renamed to getValueSchema on all interfaces

  - function getSchema(bytes32 table) external view returns (Schema schema);
  + function getValueSchema(bytes32 table) external view returns (Schema valueSchema);

• The store-sync and cli packages are updated to integrate the breaking protocol changes. Downstream projects only need to manually integrate these changes if they access low level Store or World functions. Otherwise, a fresh deploy with the latest MUD will get you these changes.

refactor: remove v1 network package, remove snap sync module, deprecate std-client (#1311) (opens in a new tab) (@latticexyz/services, create-mud)

Move createFaucetService from @latticexyz/network to @latticexyz/services/faucet.

- import { createFaucetService } from "@latticexyz/network";
+ import { createFaucetService } from "@latticexyz/services/faucet";

refactor: remove v1 network package, remove snap sync module, deprecate std-client (#1311) (opens in a new tab) (@latticexyz/std-client, @latticexyz/common, create-mud)

Deprecate @latticexyz/std-client and remove v1 network dependencies.

• getBurnerWallet is replaced by getBurnerPrivateKey from @latticexyz/common. It now returns a Hex string instead of an rxjs BehaviorSubject.

  - import { getBurnerWallet } from "@latticexyz/std-client";
  + import { getBurnerPrivateKey } from "@latticexyz/common";
  
  - const privateKey = getBurnerWallet().value;
  - const privateKey = getBurnerPrivateKey();

• All functions from std-client that depended on v1 network code are removed (most notably setupMUDNetwork and setupMUDV2Network). Consumers should upgrade to v2 networking code from @latticexyz/store-sync.

• The following functions are removed from std-client because they are very use-case specific and depend on deprecated code: getCurrentTurn, getTurnAtTime, getGameConfig, isUntraversable, getPlayerEntity, resolveRelationshipChain, findEntityWithComponentInRelationshipChain, findInRelationshipChain. Consumers should vendor these functions if they are still needed.

• Remaining exports from std-client are moved to /deprecated. The package will be removed in a future release (once there are replacements for the deprecated exports).

  - import { ... } from "@latticexyz/std-client";
  + import { ... } from "@latticexyz/std-client/deprecated";

Patch changes

feat(common,store-sync): improve initial sync to not block returned promise (#1315) (opens in a new tab) (@latticexyz/common, @latticexyz/store-sync)

Initial sync from indexer no longer blocks the promise returning from createStoreSync, syncToRecs, and syncToSqlite. This should help with rendering loading screens using the SyncProgress RECS component and avoid the long flashes of no content in templates.

By default, syncToRecs and syncToSqlite will start syncing (via observable subscription) immediately after called.

If your app needs to control when syncing starts, you can use the startSync: false option and then blockStoreOperations$.subscribe() to start the sync yourself. Just be sure to unsubscribe to avoid memory leaks.

const { blockStorageOperations$ } = syncToRecs({
  ...
  startSync: false,
});
 
// start sync manually by subscribing to `blockStorageOperation$`
const subcription = blockStorageOperation$.subscribe();
 
// clean up subscription
subscription.unsubscribe();

refactor(store): optimize table libraries (#1303) (opens in a new tab) (@latticexyz/store)

Optimize autogenerated table libraries

feat(store-sync): add more logging to waitForTransaction (#1317) (opens in a new tab) (@latticexyz/store-sync)

add retry attempts and more logging to waitForTransaction

refactor(store): optimize Schema (#1252) (opens in a new tab) (@latticexyz/store, @latticexyz/world)

Optimize Schema methods. Return uint256 instead of uint8 in SchemaInstance numFields methods

Version 2.0.0-next.2

Major changes

feat(store-indexer): use fastify, move trpc to /trpc (#1232) (opens in a new tab) (@latticexyz/store-indexer)

Adds a Fastify (opens in a new tab) server in front of tRPC and puts tRPC endpoints under /trpc to make way for other top-level endpoints (e.g. tRPC panel (opens in a new tab) or other API frontends like REST or gRPC).

If you're using @latticexyz/store-sync packages with an indexer (either createIndexerClient or indexerUrl argument of syncToRecs), then you'll want to update your indexer URL:

 createIndexerClient({
-  url: "https://indexer.dev.linfra.xyz",
+  url: "https://indexer.dev.linfra.xyz/trpc",
 });

 syncToRecs({
   ...
-  indexerUrl: "https://indexer.dev.linfra.xyz",
+  indexerUrl: "https://indexer.dev.linfra.xyz/trpc",
 });

refactor(store): remove TableId library (#1279) (opens in a new tab) (@latticexyz/store)

Remove TableId library to simplify store package

feat(create-mud): infer recs components from config (#1278) (opens in a new tab) (@latticexyz/cli, @latticexyz/std-client, @latticexyz/store-sync, @latticexyz/store, @latticexyz/world, create-mud)

RECS components are now dynamically created and inferred from your MUD config when using syncToRecs.

To migrate existing projects after upgrading to this MUD version:

1. Remove contractComponents.ts from client/src/mud

2. Remove components argument from syncToRecs

3. Update build:mud and dev scripts in contracts/package.json to remove tsgen

   - "build:mud": "mud tablegen && mud worldgen && mud tsgen --configPath mud.config.ts --out ../client/src/mud",
   + "build:mud": "mud tablegen && mud worldgen",

   - "dev": "pnpm mud dev-contracts --tsgenOutput ../client/src/mud",
   + "dev": "pnpm mud dev-contracts",

feat: bump viem to 1.6.0 (#1308) (opens in a new tab) (@latticexyz/block-logs-stream)

• removes our own getLogs function now that viem's getLogs supports using multiple events per RPC call.
• removes isNonPendingBlock and isNonPendingLog helpers now that viem narrows Block and Log types based on inputs
• simplifies groupLogsByBlockNumber types and tests

feat(dev-tools): use new sync stack (#1284) (opens in a new tab) (@latticexyz/dev-tools, create-mud)

MUD dev tools is updated to latest sync stack. You must now pass in all of its data requirements rather than relying on magic globals.

import { mount as mountDevTools } from "@latticexyz/dev-tools";
 
- mountDevTools();
+ mountDevTools({
+   config,
+   publicClient,
+   walletClient,
+   latestBlock$,
+   blockStorageOperations$,
+   worldAddress,
+   worldAbi,
+   write$,
+   // if you're using recs
+   recsWorld,
+ });

It's also advised to wrap dev tools so that it is only mounted during development mode. Here's how you do this with Vite:

// https://vitejs.dev/guide/env-and-mode.html
if (import.meta.env.DEV) {
  mountDevTools({ ... });
}

Minor changes

feat(dev-tools): use new sync stack (#1284) (opens in a new tab) (@latticexyz/common)

createContract now has an onWrite callback so you can observe writes. This is useful for wiring up the transanction log in MUD dev tools.

import { createContract, ContractWrite } from "@latticexyz/common";
import { Subject } from "rxjs";
 
const write$ = new Subject<ContractWrite>();
creactContract({
  ...
  onWrite: (write) => write$.next(write),
});

feat: bump viem to 1.6.0 (#1308) (opens in a new tab) (@latticexyz/common)

• adds defaultPriorityFee to mudFoundry for better support with MUD's default anvil config and removes workaround in createContract
• improves nonce error detection using viem's custom errors

feat(store-sync,store-indexer): consolidate sync logic, add syncToSqlite (#1240) (opens in a new tab) (@latticexyz/dev-tools, @latticexyz/store-indexer, @latticexyz/store-sync)

Store sync logic is now consolidated into a createStoreSync function exported from @latticexyz/store-sync. This simplifies each storage sync strategy to just a simple wrapper around the storage adapter. You can now sync to RECS with syncToRecs or SQLite with syncToSqlite and PostgreSQL support coming soon.

There are no breaking changes if you were just using syncToRecs from @latticexyz/store-sync or running the sqlite-indexer binary from @latticexyz/store-indexer.

feat(dev-tools): use new sync stack (#1284) (opens in a new tab) (@latticexyz/react)

Adds a usePromise hook that returns a native PromiseSettledResult object (opens in a new tab).

const promise = fetch(url);
const result = usePromise(promise);
 
if (result.status === "idle" || result.status === "pending") {
  return <>fetching</>;
}
 
if (result.status === "rejected") {
  return <>error fetching: {String(result.reason)}</>;
}
 
if (result.status === "fulfilled") {
  return <>fetch status: {result.value.status}</>;
}

Patch changes

feat: bump viem to 1.6.0 (#1308) (opens in a new tab) (@latticexyz/block-logs-stream, @latticexyz/common, @latticexyz/dev-tools, @latticexyz/network, @latticexyz/protocol-parser, @latticexyz/schema-type, @latticexyz/std-client, @latticexyz/store-indexer, @latticexyz/store-sync, create-mud)

bump viem to 1.6.0

feat(dev-tools): improve support for non-store recs components (#1302) (opens in a new tab) (@latticexyz/dev-tools, @latticexyz/store-sync)

Improves support for internal/client-only RECS components

feat: bump viem to 1.6.0 (#1308) (opens in a new tab) (@latticexyz/store-sync)

remove usages of isNonPendingBlock and isNonPendingLog (fixed with more specific viem types)

Version 2.0.0-next.1

Major changes

chore: fix changeset type (#1220) (opens in a new tab) (@latticexyz/store-indexer, @latticexyz/store-sync)

Adds store indexer service package with utils to query the indexer service.

You can run the indexer locally by checking out the MUD monorepo, installing/building everything, and running pnpm start:local from packages/store-indexer.

To query the indexer in the client, you can create a tRPC client with a URL pointing to the indexer service and call the available tRPC methods:

import { createIndexerClient } from "@latticexyz/store-sync/trpc-indexer";
 
const indexer = createIndexerClient({ url: indexerUrl });
const result = await indexer.findAll.query({
  chainId: publicClient.chain.id,
  address,
});

If you're using syncToRecs, you can just pass in the indexerUrl option as a shortcut to the above:

import { syncToRecs } from "@latticexyz/store-sync/recs";
 
syncToRecs({
  ...
  indexerUrl: "https://your.indexer.service",
});

fix: changeset package name (#1270) (opens in a new tab) (@latticexyz/cli, @latticexyz/common, @latticexyz/recs, @latticexyz/store-indexer, create-mud)

Templates and examples now use MUD's new sync packages, all built on top of viem (opens in a new tab). This greatly speeds up and stabilizes our networking code and improves types throughout.

These new sync packages come with support for our recs package, including encodeEntity and decodeEntity utilities for composite keys.

If you're using store-cache and useRow/useRows, you should wait to upgrade until we have a suitable replacement for those libraries. We're working on a sql.js (opens in a new tab)-powered sync module that will replace store-cache.

Migrate existing RECS apps to new sync packages

As you migrate, you may find some features replaced, removed, or not included by default. Please open an issue (opens in a new tab) and let us know if we missed anything.

1. Add @latticexyz/store-sync package to your app's client package and make sure viem is pinned to version 1.3.1 (otherwise you may get type errors)

2. In your supportedChains.ts, replace foundry chain with our new mudFoundry chain.

   - import { foundry } from "viem/chains";
   - import { MUDChain, latticeTestnet } from "@latticexyz/common/chains";
   + import { MUDChain, latticeTestnet, mudFoundry } from "@latticexyz/common/chains";
    
   - export const supportedChains: MUDChain[] = [foundry, latticeTestnet];
   + export const supportedChains: MUDChain[] = [mudFoundry, latticeTestnet];

3. In getNetworkConfig.ts, remove the return type (to let TS infer it for now), remove now-unused config values, and add the viem chain object.

   - export async function getNetworkConfig(): Promise<NetworkConfig> {
   + export async function getNetworkConfig() {

     const initialBlockNumber = params.has("initialBlockNumber")
       ? Number(params.get("initialBlockNumber"))
   -   : world?.blockNumber ?? -1; // -1 will attempt to find the block number from RPC
   +   : world?.blockNumber ?? 0n;

   + return {
   +   privateKey: getBurnerWallet().value,
   +   chain,
   +   worldAddress,
   +   initialBlockNumber,
   +   faucetServiceUrl: params.get("faucet") ?? chain.faucetUrl,
   + };

4. In setupNetwork.ts, replace setupMUDV2Network with syncToRecs.

   - import { setupMUDV2Network } from "@latticexyz/std-client";
   - import { createFastTxExecutor, createFaucetService, getSnapSyncRecords } from "@latticexyz/network";
   + import { createFaucetService } from "@latticexyz/network";
   + import { createPublicClient, fallback, webSocket, http, createWalletClient, getContract, Hex, parseEther, ClientConfig } from "viem";
   + import { encodeEntity, syncToRecs } from "@latticexyz/store-sync/recs";
   + import { createBurnerAccount, createContract, transportObserver } from "@latticexyz/common";

   - const result = await setupMUDV2Network({
   -   ...
   - });
    
   + const clientOptions = {
   +   chain: networkConfig.chain,
   +   transport: transportObserver(fallback([webSocket(), http()])),
   +   pollingInterval: 1000,
   + } as const satisfies ClientConfig;
    
   + const publicClient = createPublicClient(clientOptions);
    
   + const burnerAccount = createBurnerAccount(networkConfig.privateKey as Hex);
   + const burnerWalletClient = createWalletClient({
   +   ...clientOptions,
   +   account: burnerAccount,
   + });
    
   + const { components, latestBlock$, blockStorageOperations$, waitForTransaction } = await syncToRecs({
   +   world,
   +   config: storeConfig,
   +   address: networkConfig.worldAddress as Hex,
   +   publicClient,
   +   components: contractComponents,
   +   startBlock: BigInt(networkConfig.initialBlockNumber),
   +   indexerUrl: networkConfig.indexerUrl ?? undefined,
   + });
    
   + const worldContract = createContract({
   +   address: networkConfig.worldAddress as Hex,
   +   abi: IWorld__factory.abi,
   +   publicClient,
   +   walletClient: burnerWalletClient,
   + });

     // Request drip from faucet
   - const signer = result.network.signer.get();
   - if (networkConfig.faucetServiceUrl && signer) {
   -   const address = await signer.getAddress();
   + if (networkConfig.faucetServiceUrl) {
   +   const address = burnerAccount.address;

     const requestDrip = async () => {
   -   const balance = await signer.getBalance();
   +   const balance = await publicClient.getBalance({ address });
       console.info(`[Dev Faucet]: Player balance -> ${balance}`);
   -   const lowBalance = balance?.lte(utils.parseEther("1"));
   +   const lowBalance = balance < parseEther("1");

   You can remove the previous ethers worldContract, snap sync code, and fast transaction executor.

   The return of setupNetwork is a bit different than before, so you may have to do corresponding app changes.

   + return {
   +   world,
   +   components,
   +   playerEntity: encodeEntity({ address: "address" }, { address: burnerWalletClient.account.address }),
   +   publicClient,
   +   walletClient: burnerWalletClient,
   +   latestBlock$,
   +   blockStorageOperations$,
   +   waitForTransaction,
   +   worldContract,
   + };

5. Update createSystemCalls with the new return type of setupNetwork.

     export function createSystemCalls(
   -   { worldSend, txReduced$, singletonEntity }: SetupNetworkResult,
   +   { worldContract, waitForTransaction }: SetupNetworkResult,
       { Counter }: ClientComponents
     ) {
        const increment = async () => {
   -      const tx = await worldSend("increment", []);
   -      await awaitStreamValue(txReduced$, (txHash) => txHash === tx.hash);
   +      const tx = await worldContract.write.increment();
   +      await waitForTransaction(tx);
          return getComponentValue(Counter, singletonEntity);
        };

6. (optional) If you still need a clock, you can create it with:

   import { map, filter } from "rxjs";
   import { createClock } from "@latticexyz/network";
    
   const clock = createClock({
     period: 1000,
     initialTime: 0,
     syncInterval: 5000,
   });
    
   world.registerDisposer(() => clock.dispose());
    
   latestBlock$
     .pipe(
       map((block) => Number(block.timestamp) * 1000), // Map to timestamp in ms
       filter((blockTimestamp) => blockTimestamp !== clock.lastUpdateTime), // Ignore if the clock was already refreshed with this block
       filter((blockTimestamp) => blockTimestamp !== clock.currentTime) // Ignore if the current local timestamp is correct
     )
     .subscribe(clock.update); // Update the local clock

If you're using the previous LoadingState component, you'll want to migrate to the new SyncProgress:

import { SyncStep, singletonEntity } from "@latticexyz/store-sync/recs";
 
const syncProgress = useComponentValue(SyncProgress, singletonEntity, {
  message: "Connecting",
  percentage: 0,
  step: SyncStep.INITIALIZE,
});
 
if (syncProgress.step === SyncStep.LIVE) {
  // we're live!
}

feat(common): replace TableId with tableIdToHex/hexToTableId (#1258) (opens in a new tab) (@latticexyz/cli, @latticexyz/common, @latticexyz/dev-tools, @latticexyz/network, @latticexyz/std-client, @latticexyz/store-sync)

Add tableIdToHex and hexToTableId pure functions and move/deprecate TableId.

feat(common): add createContract, createNonceManager utils (#1261) (opens in a new tab) (@latticexyz/common)

Add utils for using viem with MUD

• createContract is a wrapper around viem's getContract (opens in a new tab) but with better nonce handling for faster executing of transactions. It has the same arguments and return type as getContract.
• createNonceManager helps track local nonces, used by createContract.

Also renames mudTransportObserver to transportObserver.

Minor changes

feat(common): add viem utils (#1245) (opens in a new tab) (@latticexyz/common)

Add utils for using viem with MUD

• mudFoundry chain with a transaction request formatter that temporarily removes max fees to work better with anvil --base-fee 0
• createBurnerAccount that also temporarily removes max fees during transaction signing to work better with anvil --base-fee 0
• mudTransportObserver that will soon let MUD Dev Tools observe transactions

You can use them like:

import { createBurnerAccount, mudTransportObserver } from "@latticexyz/common";
import { mudFoundry } from "@latticexyz/common/chains";
 
createWalletClient({
  account: createBurnerAccount(privateKey),
  chain: mudFoundry,
  transport: mudTransportObserver(http()),
  pollingInterval: 1000,
});

feat(store-indexer,store-sync): make chain optional, configure indexer with RPC (#1234) (opens in a new tab) (@latticexyz/store-indexer, @latticexyz/store-sync)

• Accept a plain viem PublicClient (instead of requiring a Chain to be set) in store-sync and store-indexer functions. These functions now fetch chain ID using publicClient.getChainId() when no publicClient.chain.id is present.
• Allow configuring store-indexer with a set of RPC URLs (RPC_HTTP_URL and RPC_WS_URL) instead of CHAIN_ID.

feat(store-sync): export singletonEntity as const, allow startBlock in syncToRecs (#1235) (opens in a new tab) (@latticexyz/store-sync)

Export singletonEntity as const rather than within the syncToRecs result.

- const { singletonEntity, ... } = syncToRecs({ ... });
+ import { singletonEntity, syncToRecs } from "@latticexyz/store-sync/recs";
+ const { ... } = syncToRecs({ ... });

feat(schema-type): add type narrowing isStaticAbiType (#1196) (opens in a new tab) (@latticexyz/schema-type)

add type narrowing isStaticAbiType

feat(common): move zero gas fee override to createContract (#1266) (opens in a new tab) (@latticexyz/common)

• Moves zero gas fee override to createContract until https://github.com/wagmi-dev/viem/pull/963 (opens in a new tab) or similar feature lands
• Skip simulation if gas is provided

Patch changes

fix(cli): add support for legacy transactions in deploy script (#1178) (opens in a new tab) (@latticexyz/cli)

Add support for legacy transactions in deploy script by falling back to gasPrice if lastBaseFeePerGas is not available

feat: protocol-parser in go (#1116) (opens in a new tab) (@latticexyz/services)

protocol-parser in Go

refactor(store): optimize Storage library (#1194) (opens in a new tab) (@latticexyz/store)

Optimize storage library

feat(common): remove need for tx queue in createContract (#1271) (opens in a new tab) (@latticexyz/common)

• Remove need for tx queue in createContract

feat(store-sync): add block numbers to SyncProgress (#1228) (opens in a new tab) (@latticexyz/store-sync)

Adds latestBlockNumber and lastBlockNumberProcessed to internal SyncProgress component

feat(store-sync): sync to RECS (#1197) (opens in a new tab) (@latticexyz/store-sync)

Add RECS sync strategy and corresponding utils

import { createPublicClient, http } from 'viem';
import { syncToRecs } from '@latticexyz/store-sync';
import storeConfig from 'contracts/mud.config';
import { defineContractComponents } from './defineContractComponents';
 
const publicClient = createPublicClient({
  chain,
  transport: http(),
  pollingInterval: 1000,
});
 
const { components, singletonEntity, latestBlock$, blockStorageOperations$, waitForTransaction } = await syncToRecs({
  world,
  config: storeConfig,
  address: '0x...',
  publicClient,
  components: defineContractComponents(...),
});

fix(store): align Store event names between IStoreWrite and StoreCore (#1237) (opens in a new tab) (@latticexyz/store)

Align Store events parameter naming between IStoreWrite and StoreCore

fix(cli): explicit import of world as type (#1206) (opens in a new tab) (@latticexyz/cli, @latticexyz/std-client)

Generated contractComponents now properly import World as type

feat(store-sync): export singletonEntity as const, allow startBlock in syncToRecs (#1235) (opens in a new tab) (@latticexyz/store-sync)

Add startBlock option to syncToRecs.

import { syncToRecs } from "@latticexyz/store-sync/recs";
import worlds from "contracts/worlds.json";
 
syncToRecs({
  startBlock: worlds['31337'].blockNumber,
  ...
});

chore: pin node to 18.16.1 (#1200) (opens in a new tab) (@latticexyz/network)

Remove devEmit function when sending network events from SyncWorker because they can't be serialized across the web worker boundary.

feat(cli,recs,std-client): update RECS components with v2 key/value schemas (#1195) (opens in a new tab) (@latticexyz/cli, @latticexyz/recs, @latticexyz/std-client)

Update RECS components with v2 key/value schemas. This helps with encoding/decoding composite keys and strong types for keys/values.

This may break if you were previously dependent on component.id, component.metadata.componentId, or component.metadata.tableId:

• component.id is now the on-chain bytes32 hex representation of the table ID
• component.metadata.componentName is the table name (e.g. Position)
• component.metadata.tableName is the namespaced table name (e.g. myworld:Position)
• component.metadata.keySchema is an object with key names and their corresponding ABI types
• component.metadata.valueSchema is an object with field names and their corresponding ABI types

refactor(store): update tightcoder codegen, optimize TightCoder library (#1210) (opens in a new tab) (@latticexyz/common, @latticexyz/store, @latticexyz/world)

• Refactor tightcoder to use typescript functions instead of ejs
• Optimize TightCoder library
• Add isLeftAligned and getLeftPaddingBits common codegen helpers

Version 2.0.0-next.0

Minor changes

feat(store-sync): add store sync package (#1075) (opens in a new tab) (@latticexyz/block-logs-stream, @latticexyz/protocol-parser, @latticexyz/store-sync, @latticexyz/store)

Add store sync package

feat(protocol-parser): add abiTypesToSchema (#1100) (opens in a new tab) (@latticexyz/protocol-parser)

feat: add abiTypesToSchema, a util to turn a list of abi types into a Schema by separating static and dynamic types

chore(protocol-parser): add changeset for #1099 (#1111) (opens in a new tab) (@latticexyz/protocol-parser)

feat: add encodeKeyTuple, a util to encode key tuples in Typescript (equivalent to key tuple encoding in Solidity and inverse of decodeKeyTuple). Example:

encodeKeyTuple({ staticFields: ["uint256", "int32", "bytes16", "address", "bool", "int8"], dynamicFields: [] }, [
  42n,
  -42,
  "0x12340000000000000000000000000000",
  "0xFFfFfFffFFfffFFfFFfFFFFFffFFFffffFfFFFfF",
  true,
  3,
]);
// [
//  "0x000000000000000000000000000000000000000000000000000000000000002a",
//  "0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffd6",
//  "0x1234000000000000000000000000000000000000000000000000000000000000",
//  "0x000000000000000000000000ffffffffffffffffffffffffffffffffffffffff",
//  "0x0000000000000000000000000000000000000000000000000000000000000001",
//  "0x0000000000000000000000000000000000000000000000000000000000000003",
// ]

feat(store-sync): rework blockLogsToStorage (#1176) (opens in a new tab) (@latticexyz/block-logs-stream, @latticexyz/store-sync)

• Replace blockEventsToStorage with blockLogsToStorage that exposes a storeOperations callback to perform database writes from store operations. This helps encapsulates database adapters into a single wrapper/instance of blockLogsToStorage and allows for wrapping a block of store operations in a database transaction.
• Add toBlock option to groupLogsByBlockNumber and remove blockHash from results. This helps track the last block number for a given set of logs when used in the context of RxJS streams.

feat(block-logs-stream): add block logs stream package (#1070) (opens in a new tab) (@latticexyz/block-logs-stream)

Add block logs stream package

import { filter, map, mergeMap } from "rxjs";
import { createPublicClient, parseAbi } from "viem";
import {
  createBlockStream,
  isNonPendingBlock,
  groupLogsByBlockNumber,
  blockRangeToLogs,
} from "@latticexyz/block-logs-stream";
 
const publicClient = createPublicClient({
  // your viem public client config here
});
 
const latestBlock$ = await createBlockStream({ publicClient, blockTag: "latest" });
 
const latestBlockNumber$ = latestBlock$.pipe(
  filter(isNonPendingBlock),
  map((block) => block.number)
);
 
latestBlockNumber$
  .pipe(
    map((latestBlockNumber) => ({ startBlock: 0n, endBlock: latestBlockNumber })),
    blockRangeToLogs({
      publicClient,
      address,
      events: parseAbi([
        "event StoreDeleteRecord(bytes32 table, bytes32[] key)",
        "event StoreSetField(bytes32 table, bytes32[] key, uint8 schemaIndex, bytes data)",
        "event StoreSetRecord(bytes32 table, bytes32[] key, bytes data)",
        "event StoreEphemeralRecord(bytes32 table, bytes32[] key, bytes data)",
      ]),
    }),
    mergeMap(({ logs }) => from(groupLogsByBlockNumber(logs)))
  )
  .subscribe((block) => {
    console.log("got events for block", block);
  });

feat(gas-report): create package, move relevant files to it (#1147) (opens in a new tab) (@latticexyz/cli, @latticexyz/gas-report, @latticexyz/store)

Create gas-report package, move gas-report cli command and GasReporter contract to it

refactor(store,world): replace isStore with storeAddress (#1061) (opens in a new tab) (@latticexyz/std-contracts, @latticexyz/store, @latticexyz/world)

Rename MudV2Test to MudTest and move from @latticexyz/std-contracts to @latticexyz/store.

// old import
import { MudV2Test } from "@latticexyz/std-contracts/src/test/MudV2Test.t.sol";
// new import
import { MudTest } from "@latticexyz/store/src/MudTest.sol";

Refactor StoreSwitch to use a storage slot instead of function isStore() to determine which contract is Store:

• Previously StoreSwitch called isStore() on msg.sender to determine if msg.sender is a Store contract. If the call succeeded, the Store methods were called on msg.sender, otherwise the data was written to the own storage.
• With this change StoreSwitch instead checks for an address in a known storage slot. If the address equals the own address, data is written to the own storage. If it is an external address, Store methods are called on this address. If it is unset (address(0)), store methods are called on msg.sender.
• In practice this has the same effect as before: By default the World contracts sets its own address in StoreSwitch, while System contracts keep the Store address undefined, so Systems write to their caller (World) if they are executed via call or directly to the World storage if they are executed via delegatecall.
• Besides gas savings, this change has two additional benefits:
  1. it is now possible for Systems to explicitly set a Store address to make them exclusive to that Store and
  2. table libraries can now be used in tests without having to provide an explicit Store argument, because the MudTest base contract redirects reads and writes to the internal World contract.

feat(store-sync): sync to sqlite (#1185) (opens in a new tab) (@latticexyz/store-sync)

blockLogsToStorage(sqliteStorage(...)) converts block logs to SQLite operations. You can use it like:

import { drizzle } from "drizzle-orm/better-sqlite3";
import Database from "better-sqlite3";
import { BaseSQLiteDatabase } from "drizzle-orm/sqlite-core";
import { createPublicClient } from "viem";
import { blockLogsToStorage } from "@latticexyz/store-sync";
import { sqliteStorage } from "@latticexyz/store-sync/sqlite";
 
const database = drizzle(new Database('store.db')) as any as BaseSQLiteDatabase<"sync", void>;
const publicClient = createPublicClient({ ... });
 
blockLogs$
  .pipe(
    concatMap(blockLogsToStorage(sqliteStorage({ database, publicClient }))),
    tap(({ blockNumber, operations }) => {
      console.log("stored", operations.length, "operations for block", blockNumber);
    })
  )
  .subscribe();

feat(common): new utils, truncate table ID parts (#1173) (opens in a new tab) (@latticexyz/common)

TableId.toHex() now truncates name/namespace to 16 bytes each, to properly fit into a bytes32 hex string.

Also adds a few utils we'll need in the indexer:

• bigIntMin is similar to Math.min but for bigints
• bigIntMax is similar to Math.max but for bigints
• bigIntSort for sorting an array of bigints
• chunk to split an array into chunks
• wait returns a Promise that resolves after specified number of milliseconds

feat(cli): update set-version to match new release structure, add --tag, --commit (#1157) (opens in a new tab) (@latticexyz/cli)

• update the set-version cli command to work with the new release process by adding two new options:
  • --tag: install the latest version of the given tag. For snapshot releases tags correspond to the branch name, commits to main result in an automatic snapshot release, so --tag main is equivalent to what used to be -v canary
  • --commit: install a version based on a given commit hash. Since commits from main result in an automatic snapshot release it works for all commits on main, and it works for manual snapshot releases from branches other than main
• set-version now updates all package.json nested below the current working directory (expect node_modules), so no need for running it each workspace of a monorepo separately.

Example:

pnpm mud set-version --tag main && pnpm install
pnpm mud set-version --commit db19ea39 && pnpm install

Patch changes

fix(protocol-parser): properly decode empty records (#1177) (opens in a new tab) (@latticexyz/protocol-parser)

decodeRecord now properly decodes empty records

refactor(store): clean up Memory, make mcopy pure (#1153) (opens in a new tab) (@latticexyz/cli, @latticexyz/common, @latticexyz/store, @latticexyz/world)

Clean up Memory.sol, make mcopy pure

fix(recs): improve messages for v2 components (#1167) (opens in a new tab) (@latticexyz/recs)

improve RECS error messages for v2 components

test: bump forge-std and ds-test (#1168) (opens in a new tab) (@latticexyz/cli, @latticexyz/gas-report, @latticexyz/noise, @latticexyz/schema-type, @latticexyz/solecs, @latticexyz/std-contracts, @latticexyz/store, @latticexyz/world, create-mud)

bump forge-std and ds-test dependencies

fix(schema-type): fix byte lengths for uint64/int64 (#1175) (opens in a new tab) (@latticexyz/schema-type)

Fix byte lengths for uint64 and int64.

build: bump TS (#1165) (opens in a new tab) (@latticexyz/cli, create-mud, @latticexyz/utils, @latticexyz/world)

bump to latest TS version (5.1.6)

build: bump viem, abitype (#1179) (opens in a new tab) (@latticexyz/block-logs-stream, @latticexyz/cli, @latticexyz/common, @latticexyz/dev-tools, @latticexyz/network, @latticexyz/protocol-parser, @latticexyz/schema-type, @latticexyz/std-client, @latticexyz/store-cache, @latticexyz/store-sync, @latticexyz/store)

• bump to viem 1.3.0 and abitype 0.9.3
• move @wagmi/chains imports to viem/chains
• refine a few types

test(e2e): add more test cases (#1074) (opens in a new tab) (@latticexyz/services)

fix a bug related to encoding negative bigints in MODE

fix: remove devEmit when sending events from SyncWorker (#1109) (opens in a new tab) (@latticexyz/network)

Remove devEmit function when sending network events from SyncWorker because they can't be serialized across the web worker boundary.